Panasonic TQBJ0350 - Manual (Page 15)

Precautions with regard to safety
ENGLISH -
15
Important
Information
„ Cautions when setting the projectors 2
Make a clearance of at least 5 mm between the z
projector bottom and setting surface by inserting
spacers (metallic) etc. between them.
Do not stack the projectors without using frame or z
shelf.
Do not cover the ventilation openings or place z
anything within 50 cm (20") of them as this may
cause damage or injury.
Avoid heating or cooling air of the air conditioning z
systems directly blow on to the projector
ventilation openings.
You can tilt the projector within ± 15 degrees z
horizontally.
When placing the projector in confined space, a ventilation or air conditioning system must be equipped, and z
keep enough ventilation space on the rear and both sides of the projector.
Security
Take safety measures against following incidents. „
Personal information being leaked via this product. z
Unauthorized operation of this product by a malicious third party. z
Interfering or stopping of this product by a malicious third party. z
Security instruction „
The connecting network must be secured by firewall or others. z
Change your password regularly. z
Do not use a password that is simple to guess. z
Panasonic and its affiliate companies would never directly inquire about your password. z
Do not share your password with the general public. z
Set a password, and place restrictions on the users who can log in. z
Cautions on use
In order to get the picture quality „
Draw curtains or blinds over windows and turn off any lights near the screen to prevent outside light or light z
from indoor lamps from shining onto the screen.
Depending on where the projector is used, air exhaust vents or the warm air from air conditioning can cause z
a shimmering effect on the screen. For this reason, take care not to shield the air exhaust vents and consider
the direction of the air flowing from air conditioning.
+15°
-15°
over 50 cm
(20")
over 10 cm (4")
over 50 cm
(20")
over 50 cm
(20")