Panasonic PV DM2093 - Manual (Page 19)

19 19
Basic Operation
e
Playback (Source)
1
Recording (Editing) unit
Insert pre-recorded
tape. Insert blank tape with
record tab.
• Dubbing tapes protected with
Copy Guard will have poor
quality results.
2
3
4
5
Press PLAY then press
PAUSE at starting point
to put in Standby mode.
Press PLAY
to start dubbing.
Press STOP
to stop dubbing.
Select “LINE” mode.
See “Selecting Input Mode” below.
Selecting Input Mode
• Unauthorized exchanging and/or copying
of copyrighted recordings may be copyright
infringement.
• Please note that some tapes cannot be dubbed on
this unit. Also, it is not possible to dub DVD/Video
CD/CD to VHS tape using this unit.
Caution
(Perform operation of steps 4 and 5 on both units at same time.)
STOP
Copy Your Tapes (Dubbing)
Press REC, then press
STILL/PAUSE immediately to
put in Standby mode.
Press STILL/PAUSE to start
dubbing.
Press STOP to stop dubbing.
Method 1:
Press CH . The display will change as
follows.
Method 2:
a Press ACTION for MAIN MENU.
b Press to select “TV,” then press SET
for SET UP TV screen.
c Press to select “INPUT SELECT,” and then
press SET to select “TUNER” or “LINE.”
d Press ACTION twice to exit this mode.
Connections you’ll need to make
L-AUDIO IN-R VIDEO IN
Recording (Editing) unit
OUT
IN
IN FROM
ANT.
OUT TO
TV
VID EO R-AUDIO-L
Playing (Source) VCR
MONO
*Important: If
a remote control button does not work when pressed, press the TV/VCR button on the remote
and try the button again.
1 2 3
125 LINE
(CABLE)
69
(TV)
or