Pioneer AVH-P3100DVD - Manual (Page 70)

HD Radio
™ tuner
Listening to HD Radio
2 2 2 1 1 1 3 3 3 4 4 4
5 5 5
6 6 6
7 7 7 8 8 8 9 9 9
You can use this unit to control an HD Radio
tuner (GEX-P10HD), which is sold separately.
For details concerning operation, refer to the
HD Radio tuner
’s operation manual.
1 Source icon
Shows which source has been selected.
2 Band indicator
Shows which band the radio is tuned to, AM
or FM.
3 Preset number indicator
Shows which preset has been selected.
4 Frequency indicator
Shows the frequency to which the tuner is
tuned.
5
/ (signal reception status) indi-
cator
When digital signal is received, is dis-
played. Otherwise, is displayed.
6
(HD station) indicator
Shows when the tuner is tuned to HD radio
station.
7 (radio field strength) indicator
Shows the radio field strength.
8 / (seek mode) indica-
tor
Shows the seek mode status.
9
/ (reception mode)
indicator
Shows the setup value of reception mode.
1 Touch the source icon and then touch
HD Radio to select the HD Radio.
2 Touch Band to select a band.
Touch Band until the desired band (FM1,
FM2, FM3 for FM or AM) is displayed.
3 To perform manual tuning, briefly
touch c or d.
# You can also perform manual tuning by press-
ing c or d (TRK).
4 To perform seek tuning, keep touching
c or d for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
# You can cancel seek tuning by briefly touching
either c or d.
# If you keep touching c or d you can skip sta-
tions. Seek tuning starts as soon as you release
the key.
# You can also perform seek tuning by pressing
and holding c or d (TRK).
Storing and recalling broadcast
frequencies
The operation is the same as that of the tuner.
(Refer to Storing and recalling broadcast fre-
quencies on page 17.)
Displaying text information
Desired information can be displayed.
% Touch INFO repeatedly to switch be-
tween the following settings:
Call sign
—artist name—song title—program
type
Available accessories
En
70
Section
19