Pioneer PDP-507XD - Manual (Page 31)

31
En
Basic Adjustment Settings 08
En
gl
is
h
Labeling TV channels
You can name TV channels that you have set up, using up to
five characters. This may help you easily identify the channels
during selections.
1
Press HOME MENU.
2
Select “Setup” ( / then ENTER).
3
Select “Analogue TV Setup” ( / then ENTER).
• The password entry screen appears. Enter your 4-digit
password using buttons 0 to 9.
4
Select “Label” ( / then ENTER).
5
Select “Programme Entry” ( / ).
6
Select a programme number ( / ).
• You can select 1 through 99.
7
Select “Label” ( / then ENTER).
• The name entry screen appears.
8
Select the first character ( / , / then ENTER).
• The cursor moves to the second character.
9
Repeat step 8 to enter up to five characters.
• To correct entered characters, select [ ] or [ ] on the
screen, and then press ENTER. The cursor moves to the
preceding or subsequent character.
• To delete the current character, select [Delete] on the
screen, and then press ENTER.
• To put a space for the current character, select [Space]
on the screen, and then press ENTER.
10
To complete the name entry, press / or / to select
[OK] on the screen, and then press ENTER.
11
Press HOME MENU to exit the menu.
NOTE
• The above procedure transfers and sets the selected channel
information to the connected recording equipment such as
a VCR or DVD/HDD recorder (DVR).
Sorting preset TV channels
Use the following procedure to change the sequence of the
preset TV programmes.
1
Press HOME MENU.
2
Select “Setup” ( / then ENTER).
3
Select “Analogue TV Setup” ( / then ENTER).
• The password entry screen appears. Enter your 4-digit
password using buttons 0 to 9.
4
Select “Sort” ( / then ENTER).
• The sort screen appears.
5
Select a channel to be shifted ( / , / then ENTER).
6
Select a new location ( / , / then ENTER).
• Sorting is executed.
7
Press HOME MENU to exit the menu.
NOTE
• To change a page on the Sort screen in step 6, select ▲/▼ on
the screen with / to select a page, and then press ENTER.
• The above procedure transfers and sets only the shifted
channel information to recording equipment such as a VCR
or DVD/HDD recorder (DVR).
Language setting
You can select the language to be used for on-screen display
such as menus and instructions, from among 16 languages;
English, German, French, Italian, Spanish, Dutch, Swedish,
Portuguese, Greek, Finnish, Russian, Turkish, Norwegian,
Danish, Czech, and Polish.
For the language to be used in the TELETEXT mode, you can
select from among West Europe, East Europe, Greece/Turkey,
Cyrillic, and Arabia.
1
Press HOME MENU.
2
Select “Setup” ( / then ENTER).
3
Select “Language” ( / then ENTER).
4
Select “Menu” ( / ).
5
Select a language ( / ).
6
Select “Teletext” ( / ).
7
Select a language ( / ).
8
Press HOME MENU to exit the menu.
Label
Label
Programme Entry 1
1 2 3 4 5 6 7 8 9 0
A Delete
Space
OK
B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z , . : ;
& ' ( ) + - * / _ @
Sort 1/4
AAAAA 01
BBBBB 02
CCCCC 03
DDDDD 04
EEEEE 05
FFFFF 06
GGGGG 07
HHHHH 08
IIIII 09
10
11
12
13
14
15
16
17
RRRRR 18
19
20
21
22
23
24
25
JJJJJ
KKKKK
LLLLL
MMMMM
NNNNN
OOOOO
PPPPP
SSSSS
TTTTT
UUUUU
VVVVV
WWWWW
XXXXX
YYYYY
QQQQQ
Language
Teletext
Menu
West Europe
English