Pioneer PDP-507XD - Manual (Page 50)

50
En
Using the Electronic Programme Guide (EPG)(for DTV only) 10
Changing/cancelling TV programme presettings
Using the EPG
Use the following procedure to change or cancel programme
presettings using the EPG.
1
Press EPG.
• The EPG screen appears.
2
Select the desired preset programme ( / , / then
ENTER or GREEN).
• A dialogue box appears.
• If you select “Yes”, go to step 3.
• To quit the operation, select “No”.
3
Select the preset programme ( or ENTER).
4
Select a programme number to edit ( / ).
• You can delete the preset programme by pressing the
RED button.
5
Edit the selected preset programme and update the
setting (
ENTER).
• The screen alerts you if the preset programme being
edited has already started or finished.
6
When the setting is complete, press EPG to exit the EPG
screen.
NOTE
• When you want to stop recording/watching in progress that
was started by a programme presetting, for example, to
change the channel, an alert message appears indicating
that the presetting will be cancelled. In this case, you cannot
cancel the programme presetting using the EPG.
Using the menu
Use the following procedure to change or cancel programme
presettings using the menu.
1
Press HOME MENU.
2
Select “Setup” ( / then ENTER).
3
Select “DTV Setup” ( / then ENTER).
4
Select “Programme Timer” ( / then ENTER).
• The schedule table appears.
5
Select a programme number to be edited ( / ).
• Delete the programme presetting (
RED).
• Start editing ( ENTER).
6
Adjust the desired item ( / , / ).
7
Press ENTER to complete the setting.
• The screen alerts you if the preset programme being
edited has already started or finished.
8
Press HOME MENU to exit the menu.
Changing priorities for overlapped presettings
You can change the priority order for overlapped preset
programmes to suit your preference.
1
Press HOME MENU.
2
Select “Setup” ( / then ENTER).
3
Select “DTV Setup” ( / then ENTER).
4
Select “Programme Timer” ( / then ENTER).
• The schedule table appears.
5
Select a programme to edit ( / then BLUE).
6
Select the position to move the selected programme
( / ).
7
Now move the programme to the selected position by
pressing
BLUE or ENTER.
02
03
04
05
06
07
08
09
10
Every Day
Every Sun
Mon-Fri
Sat, Sun
01 Mon.05.Jan
No.
Programme Timer
Date
14:00-15:00
14:00-15:00
14:00-15:00
14:00-15:00
12:00-13:00
Time
007 ***************
007 ***************
007 ***************
007 ***************
001 ************
Channel Info
Wed.24.Nov 12:34
02
03
04
05
06
07
08
09
10
Every Day
Every Sun
Mon-Fri
Sat, Sun
01 Mon.05.Jan
No.
Programme Timer
Date
14:00-15:00
14:00-15:00
14:00-15:00
14:00-15:00
12:00-13:00
Time
007 ***************
007 ***************
007 ***************
007 ***************
001 ************
Channel Info
Wed.24.Nov 12:34