Pioneer PDP-507XD - Manual (Page 37)

37
En
Basic Adjustment Settings 08
En
gl
is
h
Listening to audio from the sub screen
using headphones
With headphones connected, you can listen to audio coming
from the sub screen when in the 2-screen or picture-in-picture
mode; audio coming from the main screen is output from the
speakers. To use this function, follow the procedure below.
1
Press HOME MENU.
2
Select “Sound” ( / then ENTER).
3
Select “Headphone Output” ( / ).
4
Select the desired parameter ( / ).
5
Select “Sub Volume” ( / ).
6
Select the desired volume level ( / ).
7
Press HOME MENU to exit the menu.
NOTE
• To adjust the volume for headphones after selecting “Sub”,
always use the menu item (shown in the procedure) no
matter whether the screen is in the single, 2-screen, or
picture-in-picture mode. When the screen is in the single
mode with “Sub” selected, audio coming from the screen is
output from speakers even with headphones connected.
• Audio from a connected subwoofer is muted when you have
selected “Sub” for “Headphone Output” and connected
headphones.
Power Control
Power Control provides convenient functions for power saving.
Energy Save
You may use one of the three Energy Save modes to save power
consumption.
1
Press HOME MENU.
2
Select “Power Control” ( / then ENTER).
3
Select “Energy Save” ( / then ENTER).
4
Select “Save 1”,”Save 2”, or “Picture Off” ( / then
ENTER).
5
Press HOME MENU to exit the menu.
NOTE
• You can also select this function using the Home menu
when the input source is a PC.
• When you change the Energy Save mode, you may notice a
change in the panel sound. This is normal.
No Signal off (AV mode only)
The system will be automatically placed into the standby mode
if no signal is received for 15 minutes.
1
Press HOME MENU.
2
Select “Power Control” ( / then ENTER).
3
Select “No Signal off” ( / then ENTER).
4
Select ”Enable” ( / then ENTER).
5
Press HOME MENU to exit the menu.
NOTE
• Five minutes before the system is placed into the standby
mode, a message appears every minute.
• The system may not be placed into the standby mode when
noise signals are present at the Plasma Television after a TV
programme finishes.
Item Description
Main
(factory default) Audio coming from the main screen is output
from the PHONES output terminal.
Sub When in the 2-screen or picture-in-picture mode,
audio coming from the sub screen is output
from the PHONES output terminal.
Front Surround
Headphone Output
Sub Volume
Off
15
Main
Front Surround
Headphone Output
Sub Volume
Off
Sub
15
Item Description
Standard Does not decrease the picture brightness.
Save1 Slightly lowers power consumption while
slightly suppressing the brightness drop level.
Save2 Decreases the picture brightness and lowers
power consumption.
Picture Off Deactivates the screen to save power. To restore
the screen display, press any button other than
i
+/i – and e.
This setting is not memorized by the system.
Item Description
Disable
(factory default) Does not place the system into the standby
mode.
Enable Places the system into the standby mode if no
signal is received for 15 minutes.