Panasonic HD1700pe - Manual (Page 102)

102
749* 1
AUDIO PB VR
For selecting whether the playback level
adjustment controls are to function in the EE
mode when INT SG has been selected on the
<AUDIO> function menu.
0000 DIS: The INT SG output level is fixed
at the UNITY level.
0001 ENA: The INT SG output level can be
varied using the playback level
adjustment controls.
Setup menus
The underlining (__) denotes the factory setting mode.
<AUDIO> (continued)
No./Item Description of setting No./Item Description of setting
750
ANA CH1 SEL
For selecting the signal to be output to analog
output CH1.
0000 CH1: The CH1 signal is output .
0001 CH5: The CH5 signal is output
751
ANA CH2 SEL
For selecting the signal to be output to analog
output CH2.
0000 CH2: The CH2 signal is output .
0001 CH6: The CH6 signal is output .
752
ANA CH3 SEL
For selecting the signal to be output to analog
output CH3.
0000 CH3: The CH3 signal is output .
0001 CH7: The CH7 signal is output .
753
ANA CH4 SEL
For selecting the signal to be output to analog
output CH4.
0000 CH4: The CH4 signal is output .
0001 CH8: The CH8 signal is output .
754
SD SDI CH1
SL
For selecting the audio CH1 signal to be
superimposed onto the SD SDI output.
0000 CH1: The CH1 signal is output.
0001 CH2: The CH2 signal is output.
0002 CH3: The CH3 signal is output.
0003 CH4: The CH4 signal is output.
0004 CH5: The CH5 signal is output.
0005 CH6: The CH6 signal is output.
0006 CH7: The CH7 signal is output.
0007 CH8: The CH8 signal is output.
757
SD SDI CH4
SL
For selecting the audio CH4 signal to be
superimposed onto the SD SDI output
0000 CH1: The CH1 signal is output.
0001 CH2: The CH2 signal is output.
0002 CH3: The CH3 signal is output.
0003 CH4: The CH4 signal is output.
0004 CH5: The CH5 signal is output.
0005 CH6: The CH6 signal is output.
0006 CH7: The CH7 signal is output.
0007 CH8: The CH8 signal is output.
758
JOG PROC
For selecting how to process the digital audio
output slow signals in the JOG, VAR or SHTL
mode.
0000 OFF:
The sound without having the digital audio
output slow signals processed is output even
when the STILL mode is established.
0001 ON:
The sound after having the digital audio output
slow signals processed is output.
759
DV PB ATT
For selecting the audio output level during DV
format playback.
0000 OFF:
The audio output level is not attenuated.
0001 ON:
The audio output level is attenuated.
760* 1
REC PT MUTE
For selecting whether to mute the sound at
the joins between recordings during DV or
DVCAM format playback.
0000 OFF: The sound is not muted.
0001 ON: The sound is muted.
761* 1
AUDIO INT SG
For selecting the type of internal signal.
0000 TONE: A sine wave signal is selected.
0001 SILNCE: A silent signal is selected.
755
SD SDI CH2
SL
For selecting the audio CH2 signal to be
superimposed onto the SD SDI output
0000 CH1: The CH1 signal is output.
0001 CH2: The CH2 signal is output.
0002 CH3: The CH3 signal is output.
0003 CH4: The CH4 signal is output.
0004 CH5: The CH5 signal is output.
0005 CH6: The CH6 signal is output.
0006 CH7: The CH7 signal is output.
0007 CH8: The CH8 signal is output.
*1: This item is not displayed when the 23/24 Hz or 25 Hz (HD or
SD) mode has been selected as the system menu item No.25
(SYSTEM FREQ) setting.
756
SD SDI CH3
SL
For selecting the audio CH3 signal to be
superimposed onto the SD SDI output
0000 CH1: The CH1 signal is output.
0001 CH2: The CH2 signal is output.
0002 CH3: The CH3 signal is output.
0003 CH4: The CH4 signal is output.
0004 CH5: The CH5 signal is output.
0005 CH6: The CH6 signal is output.
0006 CH7: The CH7 signal is output.
0007 CH8: The CH8 signal is output.
762
AUD RATE
CON
This item enables signals to be recorded and
played back without passing them through
the rate converter in the audio input/output
section (without engaging the digital filter).
0000 OFF:
The signals are recorded and played back
without passing them through the rate
converter.
0001 ON:
The signals are recorded and played back after
passing them through the rate converter.
<Notes>
• ON/OFF control is exercised at the same time for
both recording and playback. It cannot be set
differently for recording or playback.
• ON/OFF control is exercised at the same time for
CH1 to CH8. ON or OFF cannot be set
independently for each channel.
• When the rate converter is set to OFF, the video input
signals and AES (EBU) input signals must be
synchronized. Moreover, the video input signals and
reference signal selected by OUT REF must also be
synchronized. (Noise may occur if these signals are
not synchronized.)
• In the 60 Hz mode, noise may occur if OFF is set for
the rate converter.