Panasonic HD1700pe - Manual (Page 131)

131
Specifications
[VIDEO]
Video signal adjustment ranges
• Component style
HD/SD SDI, composite output Y gain:
j¶ to i 3 dB
HD/SD SDI, composite output Pb gain:
j¶ to i 3 dB
HD/SD SDI, composite output Pr gain:
j¶ to i 3 dB
HD/SD SDI, composite output Y black level:
w 10%
• Composite style
HD/SD SDI, composite output video gain:
j¶ to i 6 dB
HD/SD SDI, composite output chroma gain:
j¶ to i 3 dB
HD/SD SDI, composite output chroma phase (* 1 ):
w 30x
HD/SD SDI, composite output Y setup:
w 10%
• System phase
HD SDI output system phase
w 5.5 H (w12100 sample, 13.5 nS step, 59/60Hz)
(w14520 sample, 50/25Hz)
(w15125 sample, 23/24Hz)
SD SDI output system phase
w 5.5 H (w9438 sample, 480i: 37nS step,
480p: 54nS step)
(w9504 sample, 576i)
Composite video output system phase
w 5.5 H (w9438 sample, 37nS step, 59Hz)
(w9504 sample, 37nS step, 50Hz)
Composite video output SC phase:
w 180x or more
*1: Only the SD SDI composite output of SD tape playback is valid
in the 50 Hz or 25 Hz mode.
[AUDIO]
Cue Track
Frequency response:
300 Hz to 6 kHz w3 dB
Audio Input Connectors
Analog input (CH1 to CH4)
XLR k 4, 600™/high impedance (selectable), i4, 0, j20
dBu selectable
Digital input (CH1/CH2, CH3/CH4, CH5/CH6, CH7/CH8)
BNC k 4, AES/EBU format
HD serial digital input
BNC k 1 (complies with SMPTE 292M/SMPTE 299M
standards)
BNC k 1 (active-through)
SD serial digital input (option)
BNC k 1 (complies with SMPTE 259M-C/SMPTE 272M-A
standards)
BNC k 1 (active-through)
Cue track input
XLR k 1, 600™/high impedance (selectable), i4, 0, j20,
j
60 dBu selectable
Audio output Connectors
Analog output (CH1 to CH4)
XLR k 4, low impedance, i4, 0, j20 dBu selectable
Digital output (CH1/CH2, CH3/CH4, CH5/CH6, CH7/CH8)
BNC k 4, AES/EBU format
HD serial digital output
BNC k 4 (complies with SMPTE 292M/SMPTE 299M
standards)
SD serial digital output
BNC k 2 (complies with SMPTE 259M-C/SMPTE
294M/SMPTE 272M-A standards)
Cue track output
XLR k 1, low impedance (selectable), i4, 0, j20 dBu
selectable
Monitor output
XLR k 2, low impedance (selectable), i4, 0, j20 dBu
selectable
Headphone output
1/4-inch phone (6.5 mm), 8™, variable level
Audio level adjustment range
j¶ to i 12 dB
[AUDIO]
Digital Audio
Sampling frequency:
48 kHz (synchronized with video)
Quantizing:
16 bits
Frequency response:
20 Hz to 20 kHz w10 dB (at reference level)
Dynamic range:
Better than 90 dB (1 kHz, emphasis OFF)
Distortion:
Less than 0.05% (1 kHz, emphasis OFF, reference level)
Crosstalk:
Less than j80 dB (1 kHz, between 2 channels)
Wow & flutter:
Below measurable limit
Headroom:
20 dB (AJ-HD1700P)
18 dB (AJ-HD1700E)