Panasonic HD1700pe - Manual (Page 97)

97
The underlining (__) denotes the factory setting mode.
*UP: With HD output (HD tape playback or up-converted output)
*DW: With SD output (SD tape playback or down-converted output)
No./Item Description of setting
Setup menus
<VIDEO> (continued)
No./Item Description of setting
680* 2
CC (F1)
BLANK*
DW
For selecting ON or OFF for the closed
caption signals in the first field.
0000 BLANK: The signals are forcibly blanked.
0001 THRU: The signals are not blanked.
681* 2
CC (F2)
BLANK*
DW
For selecting ON or OFF for the closed
caption signals in the second field.
0000 BLANK: The signals are forcibly blanked.
0001 THRU: The signals are not blanked.
682
VO SETUP
(HD)*
UP
(This menu is
not displayed for
AJ-HD1700E.)
This selects the composite output signal in HD mode.
0000 THRU: The signal is output with no
setup added.
0001 ADD22L: The signal is output from line
22 with a 7.5% setup added.
0002 ADD21L: The signal is output from line 21
with a 7.5% setup added.
0002 ADD20L: The signal is output from line 20
with a 7.5% setup added.
683
VO SETUP
(SD)*
DW
(This menu is
not displayed for
AJ-HD1700E.)
This selects the composite output signal in SD mode.
0000 THRU: The signal is output with no
setup added.
0001 ADD22L: The signal is output from line
22 with a 7.5% setup added.
0002 ADD21L: The signal is output from line
21 with a 7.5% setup added.
0002 ADD20L: The signal is output from line
20 with a 7.5% setup added.
676* 3
BLK CLIP
This function clips the signals below the
pedestal level for SD SDI OUT and composite
OUT Y (luminance) signals.
0000 OFF: The signals are not clipped.
0001 ON: The signals are clipped.
675
B-CONTRAST
For adjusting the contrast (blue) of the LCD
monitor on the front panel.
0 j 127
: :
127 0
: :
254 127
*1: This item is not displayed when the 23/24 Hz or 25 Hz (HD or
SD) mode has been selected as the system menu item No.25
(SYSTEM FREQ) setting.
*2: This item is not displayed when the 23/24 Hz, 25 Hz (HD or SD)
or 50 Hz mode has been selected as the system menu item
No.25 (SYSTEM FREQ) setting.
*3: This item is not displayed when the 50 Hz or 25 Hz (HD or SD)
mode has been selected as the system menu item No.25
(SYSTEM FREQ) setting.
*4: This item is not displayed when the 23/24 Hz or 25 Hz (HD)
mode has been selected as the system menu item No.25
(SYSTEM FREQ) setting.
688* 2
CC REC
For selecting whether to record the closed
caption signals which are superimposed on
the SD input signal.
0000 OFF: The closed caption signals are
not recorded on the tape.
0001 ON:
The closed caption signals are recorded on the
tape if they are superimposed on the SD input
signal. In this case, they are blanked, up-
converted and then recorded.
<Notes>
• When SDTI has been selected as the input signal, the
closed caption data superimposed on the
compressed input signals is recorded on the tape in
its original form regardless of this menu item’s setting.
• Setup menu item No.688 does not function when the
AJ-UC1700G optional board has not been installed.
695* 1
BLANK LINE
For selecting ON or OFF for blanking for the
vertical blanking period of the video signals
during SD tape playback.
0000 BLANK:
All the lines are forcibly blanked.
0001 THRU:
None of the lines are blanked.
0002 MANU:
Blanking ON or OFF is selected on a line-by-
line basis.
<Note>
When 2 (MANU) is set and the
button is
pressed, the display transfers to the submenu screen
where the ON or OFF can be set for each line. Press
the
button again to return the display from the
submenu screen.
SHIFT
SHIFT
Submenu screen <50Hz>
Submenu screen <59/60 Hz>
01
LINE 11&274
: :
: :
12
LINE 22&285
0000 BLANK: The lines are forcibly blanked.
0001 THRU: The lines are not blanked .
00
LINE 7&320
: :
: :
15
LINE 22&335
0000 BLANK: The lines are forcibly blanked.
0001 THRU: The lines are not blanked
686* 2
CCR MODE
(SD)*
DW
For selecting the cross color processing
during playback.
0000 OFF: The cross color is output as is.
0001 ON: The cross color can be reduced.
684
EDH (SD)* DW
For selecting whether to superimpose EDH on
the serial output signals.
0000 OFF: EDH is not superimposed.
0001 ON: EDH is superimposed.
685* 2
ESR MODE
(SD)*
DW
For selecting the operation mode for edge
subcarrier reduction (ESR) in the playback circuit.
0000 OFF: ESR is forcibly set to OFF.
0001 AUTO: ESR is automatically set to ON
or OFF in accordance with the
VTR operation.
687* 4
SDI INDEX 0
*DW
For selecting whether to superimpose the VIDEO
INDEX signal on the SD SDI output signal.
0000 OFF: The VIDEO INDEX signal is not
superimposed on the SD SDI
output signal.
0001 ON: The VIDEO INDEX signal is
superimposed on the SD SDI
output signal.