Panasonic HD1700pe - Manual (Page 98)

98
Setup menus
The underlining (__) denotes the factory setting mode.
<AUDIO>
No./Item Description of setting No./Item Description of setting
700* 1
CH1 IN LV
For selecting the audio input (CH1) reference
level.
0000 4dB
0001 0dB
0002 j 20dB
701* 1
CH2 IN LV
For selecting the audio input (CH2) reference
level.
0000 4dB
0001 0dB
0002 j 20dB
702* 1
CH3 IN LV
For selecting the audio input (CH3) reference
level.
0000 4dB
0001 0dB
0002 j 20dB
703* 1
CH4 IN LV
For selecting the audio input (CH4) reference
level.
0000 4dB
0001 0dB
0002 j 20dB
704* 1
CUE IN LV
For selecting the CUE input reference level.
0000 4dB
0001 0dB
0002 j 20dB
0003 j 60dB
705
CH1 OUT LV
For selecting the audio output (CH1)
reference level.
0000 4dB
0001 0dB
0002 j 20dB
706
CH2 OUT LV
For selecting the audio output (CH2)
reference level.
0000 4dB
0001 0dB
0002 j 20dB
707
CH3 OUT LV
For selecting the audio output (CH3)
reference level.
0000 4dB
0001 0dB
0002 j 20dB
708
CH4 OUT LV
For selecting the audio output (CH4)
reference level.
0000 4dB
0001 0dB
0002 j 20dB
711
MONIR OUT
LV
For selecting the audio monitor output (Rch)
reference level.
0000 4dB
0001 0dB
0002 j 20dB
712
MONI OUT
For selecting the audio monitor output UNITY
or VARIABLE level.
0000 UNITY: The signals are output at a
fixed level.
0001 VAR: The signal output is coupled
with the headphones volume
control.
713* 1
CH1 IN SEL
For selecting the CH1 input signal.
0000 INT SG: The internal signal is selected.
0001 DIGI: Digital input signals are
selected.
0002 ANA: Analog input signals are
selected.
<Note>
When DIGI has been selected, whether serial or AES is
selected for the input is determined by the setting
selected for setup menu item No.721 (D IN SEL 12).
714* 1
CH2 IN SEL
For selecting the CH2 input signal.
0000 INT SG: The internal signal is selected.
0001 DIGI: Digital input signals are
selected.
0002 ANA: Analog input signals are
selected.
<Note>
When DIGI has been selected, whether serial or AES is
selected for the input is determined by the setting
selected for setup menu item No.721 (D IN SEL 12).
715* 1
CH3 IN SEL
For selecting the CH3 input signal.
0000 INT SG: The internal signal is selected.
0001 DIGI: Digital input signals are
selected.
0002 ANA: Analog input signals are
selected.
<Note>
When DIGI has been selected, whether serial or AES is
selected for the input is determined by the setting
selected for setup menu item No.722 (D IN SEL 34).
716* 1
CH4 IN SEL
For selecting the CH4 input signal.
0000 INT SG: The internal signal is selected.
0001 DIGI: Digital input signals are
selected.
0002 ANA: Analog input signals are
selected.
<Note>
When DIGI has been selected, whether serial or AES is
selected for the input is determined by the setting
selected for setup menu item No.722 (D IN SEL 34).
*1: This item is not displayed when the 23/24 Hz or 25 Hz (HD or
SD) mode has been selected as the system menu item No.25
(SYSTEM FREQ) setting.
709
CUE OUT LV
For selecting the CUE output reference level.
0000 4dB
0001 0dB
0002 j 20dB
710
MONIL OUT
LV
For selecting the audio monitor output (Lch)
reference level.
0000 4dB
0001 0dB
0002 j 20dB