Profile CA600 - Manual (Page 11)

Fuse Bridged
CH1
CH3
CH2
CH4
REM GND B+
CH1 CH2
CH3 CH4
Bridged
Speaker
Output
Make the speaker connections using speaker wire that is at least 14 gauge or
heavier.
As with any audio component, proper phasing of the amplifier and speakers is essential for
strong bass response. When connecting, make sure that positive (+) from the amplifier is
connected to the positive (+) of the speaker, and the same for negative (-).
S
PEAKER CONNECTIONS
+ + - - + + - - + + - - + + - -
4 Ohm Speakers
(2 Ohm Minimum)
4 Ohm Speakers
(2 Ohm Minimum)
4 Ohm Speakers
(2 Ohm Minimum)
4 Ohm Speakers
(2 Ohm Minimum)
Rear Left Rear Left Rear Right Rear Right Front Left Front Left Front Right Front Right
TWO CHANNEL
SPEAKER CONNECTIONS CA400 & CA600M
SPEAKER CONNECTIONS
FOUR CHANNEL SPEAKER CONNECTIONS
Speaker
Output
R L
Bridged
REM GND B+
Fuse
4 Ohm Speakers
(2 Ohm Minimum)
4 Ohm Speakers
(2 Ohm Minimum)
+ + - - + + - -
Speaker
Output
Power
REM GND B+
Fuse
4 Ohm Speaker
(2 Ohm Minimum)
4 Ohm Speaker
(2 Ohm Minimum) + + - -
10