Ounting location, Ca 640 – Profile CA600 User Manual
Page 8
M
OUNTING LOCATION
Before you start the installation, it will be necessary to find a mounting location for the
amplifier. Find a location in which the amplifier will receive adequate ventilation in order to
dissipate the heat it develops during operation. Two popular mounting locations are in the
trunk or under the seat.
Select the location in which you wish to mount the amplifier. Use caution when mounting
amplifier, there are many wires, gas lines, vacuum lines, brake lines as well as a gas tank in
the automobile. Make sure you know where they are when mounting the amplifier to avoid
puncturing lines, shorting wires or drilling holes in the gas tank. Once you are ready, use a
pencil to mark the mounting holes in the bottom panel. After you have marked the locations of
the holes move amplifier out of the way and drill small starter holes to make the tapping
screws easier to install. Use provided screws to tighten down the amplifier.
CH3
CH1
CH4
Bass
Boost
0
12
X-over
40
500
85
Level
Max
POWER
PROTECTION
CA 640
CA 640
Filter
Min
Low
Off
Hi
CH2
Level
Min
Max
Filter
Low
Off
Hi
Bass
Boost
0
12
X-over
40
500
85
7