Pioneer CNDV-40R - Manual (Page 60)

58
Chapter 5
Combining and Using Pioneer AV Equipment
Switching the screen
1
Press the NAVI/AV button to select the
display mode.
As you press the NAVI/AV button, the map
screen of the Navigation System or the display
of the audio are selected.
(Map screen of the Navigation System)
(Audio operation screen)
Displaying information screen
1
Set the operation mode switch to “NAVI”.
2
Press the DISP button and switch the
screen display.
If you press the DISP button while using the
navigation display the information plate for
source appears at the bottom of the screen. If
you repeat this operation this display will
appear and disappear. If you do not operate
for 4 seconds, the information plate automati-
cally disappears.
If you press the DISP button in the screen of
each source, you can switch the items dis-
played on the screen. As you press the DISP
button, displayed items are switched over.
❒ The number of switching over varies accord-
ing to the source selected.
❒ All the characters may not be indicated
according to the length of the characters. In
such a case, “...” appears at the end of the
characters showing that all the characters are
not displayed.
Flow of menu operation at each
source
1
Press the SOURCE button and switch to
the source you want to operate.
2
Press the A.MENU (AUDIO) button.
The menu of the selected source appears.
NAVI/AV
button
N/A
(2)
(3)
(4)
(1)
(5)
(6)