Panasonic SC-AK330 - Manual (Page 8)

RQT7790
8
AK330 AK333
AK330 AK333
Discs
Repeat play CD MP3
Remote control only
Press [REPEAT] during play.
“ ” is displayed.
To cancel repeat play
Press [REPEAT] to clear “
” .
Note
You can use repeat mode with program play (A see left) and Play
Mode (A page 7) functions.
Marking a track
CD MP3
You can mark one track each on the discs loaded so that you can
start play from them later.
Remote control only
To mark a track
1 During play or stop
Select your desired track.
(A page 6, “Basic play – Skip/Search”).
2 Hold down [MARKER] until “STORING” blinks on the
display.
The selected track is stored in the marker of the current disc.
Note
If a track is already stored in the marker, it will be replaced next time
you store a new track in the same marker.
To recall a marked track number in the current disc
During play or stop
Press [MARKER] to recall a marker.
Play starts from the track recalled.
Note
• “NO MARKER” indicates that the marker in the current disc is empty.
• The marker memory is cleared when you open the disc tray.
• You cannot use this function during program play or random play.
Program play
CD MP3
You can program up to 24 tracks.
Remote control only
CD
Preparation: Press [: : : : :/ J J J J J, CD] and then [L, CLEAR].
1 Press [PROGRAM].
“PGM” appears.
2 Press [DISC] and then [1]–[5] to select the disc.
3 Select the tracks with the numbered buttons.
To select a 2-digit track, press [ >10] once then the two digits.
Repeat steps 2 and 3 to program other tracks.
4 Press [:/J, CD] to start play.
MP3
Preparation:
1. Press [DISC] and then [1]–[5] to select the disc.
2. Press [L, CLEAR].
1 Press [PROGRAM].
“PGM” appears.
2 Press [ALBUM ( or )] to select the album.
To select an album directly, press the numbered buttons
after pressing [ALBUM ( or )].
To select a 2-digit album, press [
>10] once then the two digits.
To select a 3-digit album, press [ >10] twice then the three digits.
3 Press [ g, REW/
3] or [f, 4/FF] to select the track.
To select a track directly, press the numbered buttons after
pressing [ g, REW/
3] or [f, 4/FF].
To select a 2-digit track, press [ >10] once then the two digits.
To select a 3-digit track, press [ >10] twice then the three digits.
4 Press [ENTER].
Repeat steps 2 ~ 4 to program other tracks.
5 Press [:/J, CD] to start play.
To exit program mode
Press [PROGRAM] in the stop mode. (You can replay your program
by pressing [PROGRAM] then [:/J, CD].)
You can do the following while “P” is displayed
AK230
• To check program contents
Press [g, REW/
3] or [f, 4/FF].
Every time you press the button:
CD The track number and program order are displayed:
AK230
MP3 Program order is displayed, then album number and track
number.
• To add to the program
CD Do steps 2 and 3.
MP3 Do steps 2 ~ 4.
• To clear the last track
Press [DEL].
• To clear all tracks
Press [L, CLEAR].
While “CLEAR ALL” is blinking, press the button again to clear all tracks.
Note
• You cannot program CD-DA together with MP3 tracks.
•
MP3 The program memory is cleared when you change a disc or
open the disc tray.
• MP3 You cannot program more than one disc for MP3.
H.BASS H.BASS
:/J, CD
ENTER
Numbered
buttons
L, CLEAR
ALBUM ( or )
TITLE SEARCH
CURSOR ( or ),
g, REW/3,
f, 4/FF
INTRO
MARKER
DEL
DISC
PROGRAM
REPEAT
Track number Program order