Panasonic KX-DT390 - Manual (Page 3)

Document Version 2009-03 3
Operation Board Angle Adjustment
Attaching a DPT
To lower:
Raise the operation board to level 8. Next, with one hand on the
base of the unit, lift the operation board again to release the latch,
then slowly push the operation board down to level 1. If the
operation board cannot be lowered to level 1, repeat this step.
1. Fit the protrusions on the
KX-DT390 and a DPT into the
4 holes on the plate (included).
2. Attach the plate with the 4
screws (included).
DT390M_QRG.fm Page 3 Friday, February 27, 2009 11:02 AM