Pioneer PRV LX1 - Manual

P
RODUCT
I
NFORMATION
B
ULLETIN PIB # 190102
PRV-LX1 – Default Settings
created: (GC/MD/JB) on (1 April 2004) Page 1 of 5
O VERVIEW :
The PRV-LX1 recorder ships with default settings for a typical end-user. However, your requirements may
differ. The Operating Instructions provide detailed information regarding changing these defaults or reassigning
settings according to your preferences. This document lists the PRV-LX1’s default settings when shipped from
the factory.
To return the PRV-LX1 to the factory default settings, follow the steps below.
1) Verify that the unit is in Standby mode.
2) Press and hold the STOP button on the recorder’s front panel.
3) Press and hold the Power button on the front panel.
4) Release both buttons simultaneously after the unit powers on.
Note: Returning the PRV-LX1 to the factory defaults does not erase or remove the imported clips or files.
Prod Mgmt / Sales Eng (800) 421-1613 Pioneer Electronics (USA) Inc