Pioneer dvr-rt500 - Manual (Page 67)

Editing 07
67
En
6 Press or to select “SET END” at the end
point of the scene you want to erase and press
ENTER.
The still image at the end point appears at the right
small screen.
SELECT
ENTER/
SELECT RETURN ENTER BACK END TITLE
MENU
EDIT TITLE
NAME Family
CHAPTER 2/3
LENGTH 00:15:58/00:30:17 00:15:58
00:10:20 00:15:58 Preview
Adjust start
Adjust end
Finish
7 Check the erased scenes.
• Select “Preview” and press ENTER. Then the video
where the scenes between the start and end points
are erased is played back.
• Each operation button ( F.FWD, REW, SKIP +, SKIP -,
PLAY, PAUSE/STILL) for playback also can be used.
8 Adjust the start and end points.
• To adjust the start point, select “Adjust start” and
press ENTER. You can change the start point every
one frame by pressing or .
• To adjust the end point, select “Adjust end” and
press ENTER. You can change the end point in the
same way as the start point.
9 If you determine the scene to be erased, press
or to select “Finish” and press ENTER.
• A chapter mark is automatically added at the
location of the erased scene.
Note
• It is no problem to omit the procedures for confirm-
ing the scene or adjusting start and end points.
2D30901B_En_63_71 27/9/04, 17:54 67