Dubbing a disc onto a tape, Dubbing only the specified titles or the playlist, Dubbing 08 – Pioneer dvr-rt500 User Manual

Page 79

Advertising
background image

Dubbing

08

79

En

Preparation:

• Turn ON the TV and set to the video input mode.
• Load a source disc and a video tape for recording.
• Confirm the remaining tape for recording before

operation.

1

Press DVD/VCR to set this unit to VCR mode.

The VCR indicator will light.

2

Press REC MODE/SPEED and select the recording

mode.

• When

REC MODE/SPEED is pressed each time,

“SP” or “SLP” is selected.

• The recording mode is indicated on both the TV

screen and the display window.

• For the details of the recording mode, see page 48.

3

Press DVD/VCR and set the unit to DVD mode.

Confirm that the DVD indicator lights.

4

Press DUBBING.

The DVD is waiting for playback and the VCR is waiting
for recording. Then the following message appears.

5

Press or to select “YES” and press ENTER.

Dubbing starts.

• To cancel dubbing, select “NO” and press

ENTER.

CONFIRM DUBBING FROM DVD TO VCR

YES

NO

In dubbing, DVD playback, VCR recording and “dub”
(dubbing) indicator appear on the display window.

Video recording

DVD playback

6

To stop dubbing, press STOP.

Dubbing only the specified titles or the playlist

When you want to dub only specific titles or playlists
recorded on the disc, start the playback of the desired
title or playlist, and then immediately press

DUBBING,

STOP or PAUSE/STILL. If you press DUBBING, proceed
from step

5 above. If you press STOP or PAUSE/STILL,

proceed from step

4 above. The first few seconds of the

title or playlist may not be recorded. When playback of
the title or playlist is completed, the dubbing stops.

Dubbing a disc onto a tape

VR mode

Video mode

DVD-R

VCR

You can record both video and audio from a disc to a
video tape. When a disc with a copy guard is used, a
distorted image is recorded onto the video tape.

Note

• Dubbing cannot be accomplished when

- a copy protected disc is used.
- the erase prevention tab of video tape is removed.

• Dubbing stops when

- the disc is played back to the end and stops.
- no recording space on the Video tape remains

• During dubbing, the unit is changed to interlaced

scan mode automatically, if it has been previously
set to progressive scan mode.

• If no special permission is obtained from the

copyright owner, videos recorded from TV programs
or movies can only be used for your own personal
enjoyment.

2D30901B_En_72_80

27/9/04, 17:55

79

Advertising
This manual is related to the following products: