Pioneer dvr-rt500 - Manual (Page 85)

Additional information 09
85
En
Note
• Any error/warning message other than those above might appear. Take measures against such a message by
seeing the possible solutions above.
CANNOT RECORD
PROTECTED IMAGE
RECORDING INTERUPTED
PROTECTED IMAGE
CANNOT RECORD IN VIDEO
MODE.
COPY IMAGE ONCE ONLY.
CANNOT RECORD ON DISC.
THIS IS NOT CPRM DISC.
SWITCHING TO INTERLACE
OUTPUT FOR COPYING
CANNOT COPY DATA -
C251
CANNOT COPY DATA -
C254, C255
COPYING INTERRUPTED
DISC ERROR - C302, C303
DISC ERROR - C304, C305
DISC ERROR - C306
DISC ERROR - C307, C308
CANNOT EDIT
CANNOT EDIT - C408
PROCESSING
PLEASE WAIT
Recording was attempted on a
copy protected video.
The video was changed to a copy-
guard format in recording.
Recording was attempted of a
“Copy Once” program onto a disc
(Video mode).
Recording was attempted of a
“Copy Once” program onto a disc
without CPRM.
Dubbing was initiated from a disc
to a video tape in the progressive
scan mode.
No video tape or disc is inserted
as a source for the recording.
The source video or disc to be cop-
ied is copy-guarded.
The video tape or disc became full
during dubbing.
Cannot Format disc due to a
scratch or contamination on the
disc.
Cannot Finalize disc due to a
scratch or contamination on the
disc.
Cannot Undo Finalize disc due to
a scratch or contamination on the
disc.
Cannot Protect disc ON/OFF due
to a scratch or contamination on
the disc.
Editing cannot be performed due
to a scratch or contamination on
the disc.
Combining chapters cannot be
performed.
A process requiring a longer time
such as editing is being per-
formed.
You cannot record a copy pro-
tected video.
You cannot record a copy pro-
tected video.
Load a DVD-RW Ver. 1.1/1.2(VR
mode) with CPRM.
Load a DVD-RW Ver. 1.1/1.2(VR
mode) with CPRM.
The mode is automatically
changed to interlaced mode if
dubbing from a disc to a video
tape.
Load a video tape or disc into the
source drive.
You cannot dub a video contain-
ing copy-guarded material.
Load another video tape or disc
for recording and restart.
Check the disc and reload it, or
use another disc for recording.
Check the disc and reload it, or
use another disc for recording.
Check the disc and reload it, or
use another disc for recording.
Check the disc and reload it, or
use another disc for recording.
Check the disc and reload it, or
use another disc for recording.
Chapter marks that have been
added automatically in the eras-
ing of a scene procedure cannot
be erased.
Wait until the process is com-
plete.
Dubbing
Disc setup
Title Menu
ERROR/WARNING CAUSE POSSIBLE SOLUTIONS PAGE
MESSAGE
53
53
53
53
79
78, 79
53
78, 79
--
--
--
--
--
72
--
2D30901B_En_81_92 27/9/04, 17:56 85