Philips SE655 - Manual (Page 42)

40 Use more of your phone
The display shows the caller
information.
• Press
c Back at any time to
return to the previous menu.
8.9.1.1 To choose the format for
call log display
You must choose the correct format to
dial the area code and number of the call
log record chosen. The original incoming
number from the call log will appear as a
7, 10 or 11-digit number. If it is a long
distance call, the prefix digit 1 will
automatically appear in front of the 10-
digit local calls.
1
When viewing the call log, press
*
to change the format of the call log
display as it should be dialed from
your location. For example, if the
call log entry appears as “234-567-
8900”:
• Press
* once to display “1-234-
567-8900”
• Press
* twice to display “567-
8900”
• Press
* 3 times to display “1-
567-8900”
• Press
* 4 times to display
“234-567-8900” again.
2
To dial the current displayed
number, press
t key.
• The call is initiated.
You need to subscribe to Caller Line
Identification service to be able to see
the caller’s number or name in the call
log (see section 8.9.1 - “Access the Call
log”).
When you store an incoming number in
the phonebook, the digits of the number
will be saved exactly as they appear on
the screen.
If the first 3 digits of the incoming
number corresponds to the local area
code set in your phone, they will be
filtered automatically when you press the
t or l key to dial. To change the
local area code, see section 10.9 - “Set
Area Code”.
8.9.2 Save call list entry into the
phonebook
1
Press
u in idle mode, press o
Select to select Call List, then
scroll
n to select an entry and
press
o Menu.
2
Scroll
n to Save Number and
press
o Select.
3
Enter Name is displayed on the
screen. Enter the name of the
contact (maximum 14 characters)
and press
o OK.
4
Enter Number is displayed and
the selected number from the call
list appears in the number field. At
this time you can edit the number if
you wish to.
5
Press
o OK.
• A confirmation tone sounds and
the screen returns to call log.
Press
c Clear to delete the last digit
or character entered or long press to
delete all.
Note Note