Connecting inputs, Pioneer dj cd players, Analog turntable – Pioneer DJM-600 User Manual

Page 6: Connecting other line level output devices, Connecting other digital output devices, Connections (connecting inputs)

Advertising
background image

6

POWER

MASTER 2

REC

R

L

R

(TRS)

L

MASTER 1

L

R

PHONO

CONTROL

DIGITAL

MIC SIGNAL

CUT

ADD

SIGNAL GND

SIGNAL GND

LINE

DIGITAL

LINE

DIGITAL

CD

DIGITAL

CD

LINE

L

R

AC IN

OFF

ON

1GND

3COLD

MASTER ATT

2HOT

PHONO

CONTROL

BOOTH

R

L

(MONO)

SEND

R

L

(MONO)

RETURN

LINE

L

R

PHONO

CONTROL

CD

L

R

LINE

CONTROL

DIGITAL OUT

MIDI OUT

fs (Hz)

48 k

96 k

CD

L

R

-12dB

-6dB

-3dB

0dB

DIGITAL IN

L

R

L

R

L

R

L

R

L

R

L

R

Always turn off the power switch and disconnect the power plug from its outlet when making or changing connections.

CONNECTING INPUTS

Pioneer DJ CD players

Connect a DJ CD player’s audio output connectors to one of the
channel 1 to 2 CD input connectors or the channel 3 to 4 LINE input
connectors, and connect the player’s control cable to the
corresponding channel’s CONTROL connector.
Set the connected channel’s DIGITAL/CD switch or DIGITAL/LINE
switch to either [CD] or [LINE], and set the input selector switch to
[CD/DIGITAL] or [LINE/DIGITAL].
When making digital connections, connect the digital coaxial output
terminal of the DJ CD player to one of the channel 1 to 4 DIGITAL IN
connectors of the DJM-800; then set the corresponding channel’s
DIGITAL/CD switch or DIGITAL/LINE switch to [DIGITAL], and the
input selector switch to [CD/DIGITAL] or [LINE/DIGITAL].

Analog turntable

To connect an analog turntable, connect the turntable’s audio
output cable to one of the channel 2 to 4 PHONO input connectors.
Set the corresponding channel’s input selector switch to [PHONO].
The DJM-800’s PHONO inputs support MM cartridges.
Connect the turntable’s ground wire to one of the DJM-800’s
SIGNAL GND terminals.
÷ Note that no PHONO input connector is provided for channel 1.

Connecting other line level output devices

To use a cassette deck or other CD player, connect the component’s
audio output connectors to one of the channel 3 to 4 LINE input
connectors. Then set the corresponding channel’s DIGITAL/LINE
switch to [LINE], and the input selector switch to [LINE/DIGITAL].
Alternately, connect the component to the channel 1 LINE input
connector, then set the channel 1 input selector switch to [LINE].

Connecting other digital output devices

To use a CD player or other component with digital connections,
connect the component’s digital coaxial output connectors to one of
the channel 1 to 4 DIGITAL IN connectors; then set the corresponding
channel’s DIGITAL/CD switch or DIGITAL/LINE switch to [DIGITAL],
and the input selector switch to [CD/DIGITAL] or [LINE/DIGITAL].

Input selector switch

DIGITAL/CD switch

Analog turntable

DJ CD player

CD player, etc.

Cassette deck, etc.

Analog turntable

DJ CD player

CONNECTIONS (CONNECTING INPUTS)

DIGITAL/LINE switch

Advertising