Connecting microphone and headphones, Connecting the power cord, Microphone – Pioneer DJM-600 User Manual

Page 8: Headphones, Connect the power cord last

Advertising
background image

8

CONNECTING MICROPHONE AND HEADPHONES

Microphone

The MIC 1 jack on the upper surface of the operating panel can be
used to connect a microphone with Ø6.3 mm phone plug or XLR
plug.
The MIC 2 jack on the upper surface of the operating panel can be
used to connect a microphone with Ø6.3 mm phone plugs.
¶ When the connection panel’s MIC SIGNAL switch is set to [CUT],

no microphone sounds will be output from the BOOTH monitor
output connectors.

Headphones

The PHONES jack on the upper surface of the operating panel can be
used to connect headphones with a Ø6.3 mm stereo phone plug.

0

+

6

-

12

MIC 1
LEVEL

MIC 1

MIC 2

0

HI

EQ

MIC

LOW

MIC

+

6

OFF

ON TALK

OVER

-

12

MIC 2
LEVEL

Microphone 1

Microphone 2

(Microphone 1)

Headphones

HEADPHONES

MIXING

LEVEL

PHONES

MONO SPLIT

STEREO

MASTER

CUE

0

CONNECTIONS (CONNECTING MICROPHONE AND HEADPHONES/CONNECTING THE POWER CORD)

CONNECTING THE POWER CORD

Connect the power cord last.

÷ After completing all other connections, connect the accessory power cord to the AC inlet on the back of the player, then connect the plug to a

standard wall outlet or to the auxiliary power outlet of your amplifier.

÷ Use only the supplied power cord.

Advertising