Important information, Warning, Owner id – Panasonic TX-76PW300A User Manual

Page 3: Programme location numbers, Picture quality

Advertising
background image

3

Important Information

Warning

This television is very heavy (please see page 39). Most of the weight is at the front of the television.
Although the television has been tilt tested and meets current Australian and International Standards, we
recommend that great care be taken when positioning the television.
*

Do not allow the front of the set to overhang the stand or cabinet.

*

Make sure that the stand or cabinet is flat and does not lean forward.

*

Do not allow anyone to climb or sit on the television.

*

Do not place any heavy weights on the television.

Owner ID

This television lets you to prove ownership by letting you enter personal identification into it. The “Owner ID”
function allows you to enter a security code and address information so that in the unfortunate event of theft
it will help the Police to determine the owner. Details of setting the Owner ID are on page 20.
Note:

Do not record your PIN in this book.

As a further security precaution, please retain your proof of purchase along with these operating instructions.
Space has been made available on page 36 of this instruction book for recording the Serial Number. The
Serial Number can be found on the back cover of the set and on the packing carton.

Programme Location Numbers

This television comes to you “factory tuned” to all the major capital city broadcast stations. Adjustments to
the tuning should not be necessary. However, if you have to make adjustments, please read these
instructions carefully first. Throughout this booklet “Programme Location Numbers” are referred to. These
are memory locations into which you can tune television broadcast stations.
Any television station can be
tuned into any Programme Location Number.

Picture Quality

All televisions are affected by Magnetic Interference.
Magnetic interference may come from such things as
unshielded motors, moving the TV while it is switched ON,
turning off a vacuum cleaner too close to the TV, lightning
strikes nearby or many other things.
The interference shows up as coloured patches which
appear while the TV is switched ON.

A typical result may look like the picture shown.

Your Panasonic Television is designed to overcome this with the inclusion of a demagnetising
(degaussing) function.

To activate this feature, simply switch your Television OFF, or into Standby for 30 minutes and then
switch it back ON.

If the television is to be left unattended for extended periods (several days or more), turn the power off
to the unit. DO NOT leave in Standby mode.

This will ensure that you enjoy the picture clarity as it was meant to be.

Refer to page 19 for operating instructions for the GEOMAGNETIC feature.

Advertising
This manual is related to the following products: