Panasonic KX-FP250 - Manual (Page 23)

23
In
it
ia
l
P
re
p
a
ra
tio
n
2 Fan the stack of paper to prevent a paper jam
and insert the paper into the paper tray.
● The height of the stack of the paper should not
exceed the upper limit on the paper tray,
otherwise a paper jam or multi-feed may occur.
● The paper should not be over the tab.
● If the paper is not inserted correctly, readjust
the paper or a paper jam may occur.
Upper limit
Tab
Correct Incorrect
Stack of
paper
Paper tray
Setup
3 Move the recording paper set lever back.
Note:
● Avoid paper with a cotton and/or fiber content that is over 20%, such as letterhead paper or those
used for resumes.
● Do not use different types or thicknesses of paper in the paper tray at the same time. This may cause
a paper jam.
● Avoid extremely smooth or shiny paper that is highly textured. Also avoid paper that is coated,
damaged or wrinkled.
● Avoid double-sided printing.
● Do not use paper printed from this unit for double-sided printing with other copiers or printers, or a paper jam
may occur.
Recording paper
set lever
Adding paper to the paper tray
1. Pull the recording paper set lever forward.
● The unit will beep and the following message is
displayed.
Display:
2. Remove the installed paper.
3. Add paper to the removed paper and straighten it.
4. Fan the stack of paper and insert it into the paper
tray.
5. Move the recording paper set lever back.
CHECK LEVER
Recording paper
set lever