Receiving faxes extension telephone, Fax activation code – Panasonic KX-FP250 User Manual

Page 70

Advertising
background image

70

Receiving Faxes

Extension telephone

When you connect an extension telephone to your unit or on the same line, you can receive fax documents
using the extension telephone.
You do not have to go to the unit and press

.

Important:

Use a touch tone telephone as the extension telephone and enter the fax activation code firmly.

START/COPY/SET

1

When the extension telephone rings, lift the
handset of the extension telephone.

2

When:
— document reception is required,
— a fax calling tone (slow beep) is heard, or
— no sound is heard,
press

(pre-selected fax activation code)

firmly.

3

Hang up the handset.

The unit will start reception.

9

To the EXT jack or
the same line

Extension telephone

Note:

If you subscribe to some special telephone
company services, all or part of the fax
activation code must be different from the
service access code.

The fax activation code should not be set to
“0000”.

Note:

You can change the fax activation code (see
below).

1

Press

.

Display:

2

Press ,

then

.

3

Press .

4

Press

or

to select the desired setting.

If this feature is not required, select “OFF”.

5

Press .

The display will show the pre-selected code.

6

Enter the new code number.

This code can be from 2 to 4 digits in length
using 0 - 9 and

.

7

Press .

8

Press

.

MENU

SETUP ITEM [ ]

START/COPY/SET

CODE= 9

START/COPY/SET

MODE=ON

▼ ▲

START/COPY/SET

FAX ACTIVATION

1

4

1.SYSTEM SET UP

MENU

START/COPY/SET

Dial keypad

MENU

/

Fax activation code

The fax activation code is used in the following cases;
— when receiving faxes using an extension telephone (see above).
— when receiving a voice message and fax document in the same call (see page 63).

Important:

This code should be different from the remote activation ID (see page 63).

Advertising