Panasonic 1AG6P1P6073-S - Manual (Page 20)

20
VQT2Z95
Recording/Playback
Turning the unit on/off
Press the power button to turn on the unit.
≥ The LCD monitor lights on.
To turn off the unit
Continue pressing the power button until the LCD monitor goes off.
∫ About the screen display
Please refer to page 53 for details of the icons displayed on the screen.
∫ About the power save function
To prevent battery consumption, it will turn off the
screen and go into idle mode after approx.
2 minutes of no operation. (The status indicator
A
flashes.)
The unit will be turned off automatically if no
operation is performed for a further 5 minutes
(approx.) while in idle mode.
≥ Idle mode is canceled by pressing one of the buttons.
∫ About the high temperature warning icon
When the high temperature warning icon is displayed, the
temperature of the unit is high.
≥ It is possible to continue recording/playback when
is displayed,
but it is recommended to stop operations and turn off the unit as soon
as possible.
≥ If the temperature rises further, the unit will be turned off automatically
after flashes. You will not be able to turn on the unit again until the
temperature lowers ( will flash.), so wait until the temperature
lowers before using again.
≥ A countdown until the recording is stopped will start from approx.
15 seconds during motion picture recording, and the recording will stop
when the display reaches 0 seconds.
≥ When you turn off the unit while the temperature is high ( is
displayed.), you will not be able to turn on the unit again until the
temperature lowers. (
will flash.)

HM-TA1_PP-VQT2Z95_mst.book 20 ページ ２０１０年７月１４日 水曜日 午後５時５０分