Panasonic 1AG6P1P6073-S - Manual (Page 21)

VQT2Z95
21
When the unit is turned on for the first time, a message asking you to set
the date and time will appear.
Press the MENU/SET button and perform steps 2 to 3 below to set the
date and time.
1
Select the menu. ( l 32)
2
Select the items to be set using 1 and 2
on the cursor button, and set the desired
value using T and W.
≥ The year can be set between 2000 and 2039.
≥ The 12-hour system is used to display the time.
3
Press the MENU/SET button.
≥ The clock function starts at [00] seconds.
≥ Press 2 to complete the setting.
≥ The clock is not set when the unit is shipped.
≥ The date and time function is driven by a built-in lithium battery.
≥ If the built-in lithium battery needs to be charged, the message “Set
date and time” appears. To recharge the built-in lithium battery,
connect USB terminal of this unit to a booted PC or attach the battery
to this unit. Leave the unit as it is for approx. 24 hours and the battery
will maintain the date and time for approx. 3 months. (The battery is still
being recharged even if the unit is off.)
≥ The date and time will be set to January 1, 2010 00:00 when recording
is performed without the date and time set.
Setting date and time
: [CLOCK SET] # desired setting
[DATE]: Setting of the year/month/day
[TIME]: Setting of the hour/minute
HM-TA1_PP-VQT2Z95_mst.book 21 ページ ２０１０年７月１４日 水曜日 午後５時５０分