Pioneer DV-655A - Manual (Page 28)

Getting Started 04
28
En
Playing discs
The basic playback controls for playing DVD,
CD, SACD, Video CD/Super VCD and MP3
discs are covered here. Further functions are
detailed in the next chapter.
Throughout this manual, the term ‘DVD’
means DVD-Video, DVD-Audio and
DVD-R/RW. If a function is specific to a
particular kind of DVD disc, it is
specified.
0
1 2 3
4 5 6
7 8 9
STANDBY/ON OPEN/CLOSE
4
1 ¡
¢ 8 7
3
0
ENTER
ENTER
1 If the player isn’t already on, press
STANDBY/ON to switch it on.
If you’re playing a DVD or Video CD/Super
VCD, also turn on your TV and make sure
that it is set to the correct video input.
2 Press
0 OPEN/CLOSE to open the disc
tray.
• Load a disc with the label side facing
up, using the disc tray guide to align the
disc.
• Never load more than one disc at a time.
3 Press
3 (play) to start playback.
If you’re playing a DVD or Video CD/Super
VCD, a menu may appear. See
pages 29–30
for how to navigate these.
If you’re playing an MP3 disc, it may take a
few seconds before playback starts, depend-
ing on the complexity of the file structure on
the disc.
Basic playback controls
The table below shows the basic controls on
the remote for playing discs. The folllowing
chapter covers more playback features in
more detail.