Pioneer DV-655A - Manual (Page 64)

The Initial Settings Menu 08
64
En
Digital Audio Out
Video Output
Language
Display
Options
Speaker
L
C
R
RS
LS
SW
Auto
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
Initial Settings
You can set the individual channel levels
between –6dB and +6dB using the test tone
output as a guide to set the correct levels.
Adjust the levels until the output level from
all channels sounds the same from your
usual listening position.
Automatic: Select Auto to start the test tone
output.
Digital Audio Out
Video Output
Language
Display
Options
Speakers
L
C
R
RS
LS
SW
Auto
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
Initial Settings
As the test tone plays through each speaker
in turn, it is highlighted on-screen. Use the
/ (cursor up/down) buttons to adjust the
channel output level of the current speaker.
Press (cursor left) to exit the test tone
sequence, or
ENTER to save the settings and
exit the channel level setting screen.
Manual: Use the / (cursor up/down)
buttons to select a speaker.
Digital Audio Out
Video Output
Language
Display
Options
Speaker
L
C
R
RS
LS
SW
Auto
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
Initial Settings
Press (cursor right) then use the /
(cursor up/down) buttons to set the channel
output level.
Digital Audio Out
Video Output
Language
Display
Options
Speaker
L
C
R
RS
LS
SW
Auto
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
Initial Settings
To turn the test tone on/off for an individual
speaker, press (cursor right). The test tone
continues playing even when you select a
different speaker.
Digital Audio Out
Video Output
Language
Display
Options
Speaker
L
C
R
RS
LS
SW
Auto
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
Initial Settings
Press ENTER to save the settings and exit the
channel level setting screen.