Panasonic KX-TG6444 - Manual (Page 5)

– 5 –
Display mode
You can select to display either a single
item or multiple items on one screen at
a time for the following features:
– menu list, phonebook list, caller list,
redial list, message list, and call block
list
– handset top menu icons in function
menu
The following icons are shown when you
press down on the center of the joystick in
standby mode.
The display mode can be switched
temporarily or set by programming.
N Switching temporarily:
You can temporarily switch the display
mode as follows by pressing the right
soft key shown when viewing the lists or
selecting menu icons:
– {MULTI}: Multiple entries/all menu
icons are shown on one screen at a
time.
– {SINGLE}: An entry/a menu icon is
shown on one screen in large
characters at a time.
Note:
L When “ Multi items ” is selected as
the display mode, you can switch the
screen to confirm the detailed
information by pressing {SINGLE}.
N By programming:
You can set the unit to always show a
single item or multiple items beforehand
by selecting “
Single item ” or “ Multi
items ” as the display mode setting.
Select the desired setting:
– “
Multi items ”: Multiple entries/all
menu icons are shown on one screen
at a time.
– “ Single item ”: An entry/a menu
icon is shown on one screen in large
characters at a time.
The default setting is “ Multi items ”.
1 { MENU} (center of joystick) i
{#}{ 1}{9}{2}
2
{V} /{^}: Select the desired
setting.i {SAVE}
3 { OFF}
Note:
L When {MULTI} or “ Multi items ” is
selected as the display mode, you
can move screens by pushing the
joystick right or left, without scrolling
down or up through the list:
– Push the joystick right to go to the
next screen.
– Push the joystick left to return to the
previous screen.
Listening to messages using
the handset
Listening to messages from the
message list
You can select the item to play back.
1 { MENU} (center of joystick) i
{#}{ 3}{2}{9}
2 {V} /{^}: Select the desired item from
the message list. i {PLAY}
L
You can erase the selected
message as follows: {ERASE}
i {V}/{^}: “
Yes ” i {SELECT}
3 When finished, press {OFF}.
Note:
L If the item has already been heard,
“Q” is displayed, even if it was heard
using another handset.
Icon Feature
W Caller list
s Answering device
#
V.M. access
x Intercom
"
Initial setting
!
Customer support
TG6440(e).fm Page 5 Tuesday, January 6, 2009 6:38 PM