Panasonic KX WP1050 - Manual (Page 113)

Handset Wireless Network Connection and Settings
For assistance, please visit http://www.panasonic.com/help 113
Network settings except for the base unit:
Note:
L
For the base unit, 2 network settings TCP IP (HOME) and TCP IP (HOTEL) are
available. Either of the 2 settings is selected automatically depending on the Mode
selector position of the base unit.
To edit network settings in preferred networks list:
1
{
Menu} (middle soft key)
2
“Settings” i {Select}
3
“Network” i {Select}
4
“Preferred networks” i {Select}
L
The base unit is displayed as “Base unit”
5
Select the desired network. i {Select}
6
Select the desired network settings. i {Select}
Network settings of the base unit:
Network name L
View the network name (SSID)
Network security L
View the network security type (Open/WEP/WPA-
PSK(TKIP)/WPA2-PSK(AES))
L
View the key index when security type is WEP (Key 1/
2/3/4)
TCP IP
Select “TCP IP” i {Select}
L
View connection type (DHCP/Static IP)
L
View IP address, Subnet mask, Default gateway,
DNS server 1 and DNS server 2 when connection
type is Static IP.
Advanced setting
Select “Advanced setting” i {Select}
L
View SSID broadcast (Broadcast/No broadcast).
L
View the authentication type (Open/Shared).
TCP IP(HOME)
/
TCP IP(HOTEL)
Select “TCP IP(HOME)” or “TCP IP(HOTEL)”. i
{
Select}
For more instruction, see below “TCP IP” settings.
WP1050.book Page 113 Wednesday, April 25, 2007 6:01 PM