Panasonic KX WP1050 - Manual (Page 124)

Handset Settings
124 For assistance, please visit http://www.panasonic.com/help
Tones
You can change the handset’s ringer type, tone, volume, and other types of tones.
1
{
Menu} (middle soft key)
2
“Settings” i {Select}
3
“Tones” i {Select}
4
Select the desired setting. i {Select}
5
Select the desired item. i {Select} or change the setting by pressing {^} or {V}. i
{
OK}
Note:
L
The preset melodies in this product are used with permission of (C) 2006 Copyrights
Vision Inc.
L
When you change the selection on ring tone or ring volume screen, a tone sounds for
confirmation (Tone does not sound when ringer volume is off, silent mode is on and/or
your Skype online status is “Do not disturb”.).
Ring type
Set the ringer type to “Ringing” or “Ring once”.
Ring tone L
Set the desired ringer tone.
L The ringer tone sounds while receiving a call.
Ring volume
Adjust the ringer volume.
Notification tone L
Set the notification tone to “On” or “Off”.
L The notification tone sounds when a new voicemail
message or Authorization request is received.
Keypad tone L
Set the keypad tone to “On” or “Off”.
L
The keypad tone sounds when you press keys.
Out of service tone L
Set the out of service tone to “On” or “Off”.
L
The out of service tone sounds when the handset is
going to be out of wireless LAN service range for
making/answering calls or listening/recording
voicemail messages.
WP1050.book Page 124 Wednesday, April 25, 2007 6:01 PM