Panasonic KX WP1050 - Manual (Page 140)

Base Unit Settings
140 For assistance, please visit http://www.panasonic.com/help
5
Click [Restart].
L
The base unit automatically restarts and the Top Menu is displayed.
Note:
L The settings under the Network Connection heading display the network information for
the Internet connection on WAN side. See the Network Status page on page 175 for
detail.
L The settings under the Wireless Information heading display the wireless network
information for the handset and wireless devices connected to the base unit. See the
Wireless Status page on page 179 for detail.
L If you click [View], the current network key is displayed. You may need this information
when you set up your wireless devices.
WPA-PSK/WPA2-PSK Settings
[Network Key]
L
Enter the network key (8 – 63 alphanumeric characters) in
this data field.
L
Press [View] to display the network key.
[Data Encryption]
L
Select the desired data encryption method.
For WPA-PSK
L
If your wireless devices use TKIP, select [TKIP] or
[TKIP+AES].
L
If your wireless devices use AES, select [TKIP+AES].
For WPA2-PSK
L
If your wireless devices use TKIP, select [TKIP+AES].
L
If your wireless devices use AES, select [AES] or
[TKIP+AES].
[Session-Key
renewal interval]
L
Set the interval for refreshing the encryption key between 30
and 604800 seconds. 604800 seconds is the equivalent of
one week. The default is set to 1800.
Setting Description
WP1050.book Page 140 Wednesday, April 25, 2007 6:01 PM