Panasonic KX WP1050 User Manual

Page 36

Advertising
background image

Getting Started

36

For assistance, please visit http://www.panasonic.com/help

Setting up the base unit for the first time (Initialization
Setup)

For security purpose and enabling the Internet connection, it is necessary to set up the
base unit at the very first time. You can log in the base unit and configure the unit’s settings
using the Web browser on the computer you connected to the base unit’s “LAN” port.

Important:

L

Required Web browser:
Microsoft Internet Explorer 6.0 or later for Windows
Mozilla Firefox 1.5 or later for Windows

L

You may need to change the appropriate settings of your computer (page 203).

When you access to the base unit for the first time or after resetting the base unit to factory
default (page 186 and 201), you must go through Initialization Setup.

First you must set the user name and the password. (Remember your user name and
password in order to access the base unit again.) After that you need to configure the
Internet connection settings.

The base unit has a Mode selector (page 200) to allow users to switch its Internet
connection settings between the HOME mode and the HOTEL mode simply.

The base unit can contain up to 4 Internet connection setting profiles and 2 among those
4 setting profiles can be assigned to the mode selector positions which are HOME mode
and HOTEL mode.

For example, a setting profile of AP (Bridge) connection mode for the HOME mode and an
another setting profile of DHCP connection type for the HOTEL mode.

You are going to set up those profiles for HOME and/or HOTEL mode settings through the
initialization setup shown in the following pages.

WP1050.book Page 36 Wednesday, April 25, 2007 6:01 PM

Advertising