Patton electronic SL4050/B2/E - Manual (Page 27)

Setting up the VoIP SIP phone 27
SmartLink 4050 Series Getting Started Guide 2 • Installing the SmartLink SIP Phone
Call forwarding
CF (call forward) Unconditional
Enable CF Unconditional to forward all the incoming calls to another number. Otherwise set to disable.
Note You will need to use a web browser to input the forwarded phone number.
Refer to chapter 5,
“Using the configuration menu” on page 38 for more
information on call forwarding.
1. Press .
2. Use or to select ENABLE or DISABLE
3. Press to enter the number where the call will be forwarded.
CF (call forward) User Busy
Forward all the incoming calls to another number when the phone is in use with another call.
1. Press .
2. Use or to select ENABLE or DISABLE
3. Press to enter the number where the call will be forwarded.
CF (call forward) No Answer
Forward all incoming calls to another phone number after a certain number of rings.
1. Press .
2. Use or to select ENABLE or DISABLE
3. Press to enter the number where the call will be forwarded.
Cancel OK
CF Unconditional:
ENABLE/DISABLE
Ring Type:
Ringing 1/2/3/4/5/6/
Cancel OK
CF User Busy:
ENABLE/DISABLE
M2 Setting: (M2~M12)
Line/Park/One Touch
Cancel OK
CF No Answer:
ENABLE/DISABLE
Time Format:
24Hours