Panasonic CQ-RDP472N - Manual (Page 5)

5
CQ-RDP472N
2
E
N
G
L
I
S
H
Remote Control Unit Preparation
Battery Installation
q Remove the battery holder.
Pull the holder out at position B while pushing
position A as indicated.
w Install the battery on the battery holder.
Place the battery in the holder with its (+) side
upwards as shown.
e Insert the battery holder.
Push in the battery holder back into its original
position.
(Back side)
Lithium battery
Position B
Position A
Battery holder
Caution: Improper use of batteries may cause overheating, an explosion or ignition, resulting in injury or a fire. Battery
leakage may damage the unit.
¡Do not disassemble or short the battery. Do not throw a battery into a fire.
¡Keep batteries away from children to avoid the risk of accidents.
¡Be careful to the disposal rules when you dispose of batteries.
Remote Controls
REP SCAN RAND
POWER MENU
NUMBER
Car Audio
VOL
SOURCE
SET
SEL
MUTE
BAND DISP
1 2 3
4 5 6
7 8
0
9
[0] to [9]
Audio Mode Selection
Panel Removal Alarm Set
Power
Source
Tune
Track/File Selection
Fast forward/Fast reverse
Display
Mute
Loudness
Random
Scan
Repeat
Folder/Disc Selection
Band
Set
Pause
Volume control
Track/Folder number input
Battery Notes
Remove and dispose of an old battery immediately.
Battery Information:
¡Battery Type: Panasonic lithium battery (CR2025) (Included)
¡Battery Life: Approximately 6 months under normal use (at room temperature)