S l p, Getting started 02, Listening to other sources – Pioneer DCS-353 User Manual
Page 13: Setting the sleep timer, Dimming the display
Getting started
02
13
En
English
Français
Deutsch
Nederlands
Italiano
Español
Listening to other sources
You can connect auxiliary sources (TV, satellite
receiver, etc.) to this unit for playback through
the speaker system. See
Connecting auxiliary
audio components
on page 31 for more on this.
• To connect a USB device to the USB
terminal, see
USB playback
on page 22.
1
Make sure that the external source (TV,
satellite receiver, etc.) is switched on.
2
Press
LINE
to select the source.
U.K. model only –
Each press switches
between
LINE1
and
LINE2.
3
If necessary, start playback of the source.
Setting the sleep timer
The sleep timer switches off the system after
about an hour so you can fall asleep without
worrying about it.
1
•
Press
SLEEP
repeatedly to select an option
then press
ENTER
.
Choose between the following options:
•
SLP ON
– Switches off after about an hour
•
SLP OFF
– Cancels the sleep timer
After selecting
SLP ON
, you can press
SLEEP
again to check how much time is left. Each line
indicates approximately 12 minutes
(remaining):
Dimming the display
You can dim the display if you find it too bright.
1
Press
SETUP
and use
/
to choose
DIMMER then press
ENTER
.
This is shown in the front panel display.
2
Use
/
to select LIGHT or DARK then
press
ENTER
.
Note
1 The display dims when the sleep timer is set.
AUDIO
STANDBY
/ON
DVD/CD
TUNER
(FM/AM)
LINE
USB
OPEN/
CLOSE
S L P - - - - -
XV-DV353_360_151_252.book 13 ページ ２００５年１２月２０日 火曜日 午後４時８分