Other connections 09, Connecting using hdmi, Recording mode – Pioneer DCS-353 User Manual
Page 33
Other connections
09
33
En
English
Français
Deutsch
Nederlands
Italiano
Español
Recording mode
The Recording mode allows you to make
surround-compatible analog recordings from
the
AV CONNECTOR
output.
1
Dolby
multichannel sources will be downmixed to
stereo for improved playback with systems that
can provide matrix-decoding (like Dolby Pro
Logic).
1
Press
SOUND
.
2
Use
/
to select REC MODE then press
ENTER
.
3
Use
/
to select MODE ON or MODE
OFF then press
ENTER
to confirm.
•
MODE ON
– Multichannel sources are
downmixed to stereo for recording (the
same downmix is heard through the front
speakers and the subwoofer).
•
MODE OFF
– For regular multichannel
playback through your speaker system
(only the front left and right channels are
output from the
AV CONNECTOR
output).
Connecting using HDMI
U.K. model only
If you have a HDMI or DVI (with HDCP)
equipped monitor or display, you can connect
it to this player using a commercially available
HDMI cable for high quality digital video.
2
See
About HDMI
below for more about the
HDMI connection.
•
Use an HDMI cable to connect the HDMI
OUT interconnect on this player to an HDMI
interconnect on a HDMI-compatible monitor.
Pin No. Assignment
Pin No. Assignment
1
Audio R OUT
12
No connection
2
Audio R IN
13
GND (video)
3
Audio L OUT
14
GND (video)
4
GND (audio)
15
R or C OUT
5
GND (video)
16
BLANK OUT
6
Audio L IN
17
GND (video)
7
B OUT
18
GND (video)
8
Status
19
Video or Y OUT
9
GND (video)
20
No connection
10
No connection
21
GND (video)
11
G OUT
Note
1 • When Recording mode is on, most sound features cannot be used. The display will briefly blink
REC MODE
if you try and
use a prohibited function while Recording mode is on.
• The Recording mode switches off if you change the input function (
DVD/CD
,
TUNER
, etc.) or switch the power off.
2 An HDMI connection can only be made with DVI-equipped components compatible with both DVI and High Bandwidth Digital
Content Protection (HDCP). If you choose to connect to a DVI connector, you will need a separate adaptor (DVI
HDMI) to do
so. A DVI connection, however, does not support audio signals. Consult your local audio dealer for more information.
• This unit has been designed to be compliant with HDMI (High Definition Multimedia Interface) Version 1.1. Depending on
the component you have connected, using a DVI connection may result in unreliable signal transfers.
• When you change the component connected to the HDMI output, you will also need to change the HDMI settings to match
the new component (see
Video Output settings
on page 26 to do this).
XV-DV353_360_151_252.book 33 ページ ２００５年１２月２０日 火曜日 午後４時８分