Photo Control/Norman ML600 Monolight - Manual

Instruction
Manual
ML600 Monolight
2
INTRODUCTION
Welcome to the Norman family of interchangeable high-quality flash equipment and thank
you for purchasing a Norman Monolight system. The utilization of larger high-duty-cycle
flash capacitors and related components enables this system to be utilized for demanding
commercial and portrait silver halide and digital applications that are not normally associated
with monolights.
FEATURES
o 600 watt-second capacity. The ML600 is an honest 600 watt-seconds (1500 w-s by
today’s advertising)
o 1/20-stop repeatability at full power. Holds this tolerance with line voltages from 105
to 125 volts.
o 250 watt quartz modeling lamp with fan cooling.
o Digital controls with LED display. Adjustable in 1/10-stop increments.
o Error condition diagnostic readouts via internal software, as displayed in the LED
arrays (page 7).
o Automatic thermal protection (page 7).
o Interchangeable with over 100 Norman accessories and light modifiers with adapter
ring (part no. R9113).
o Full two year limited warranty, including parts and labor.