4 operating from a remote location, Remote operation, Operating from a remote location – Panasonic KX-FT901BX User Manual
Page 43: 4 operating from a remote location, 1 listening to recorded messages, 2 remote operations using remote commands, 3 other remote operations
8. Answering Device (KX-FT907 only)
43
Remote Operation
8.4 Operating from a remote location
You can call your unit from a remote location and access the answering device.
Important:
L
Program the remote operation ID beforehand (feature #11, page 47).
L
Set the unit to TAD/FAX mode before going out (page 35).
L
Use a touch tone telephone for remote operations.
Helpful hints:
L
When you press a key, press firmly.
L
Please make a copy of the following table, and carry it with you when you go out.
8.4.1 Listening to recorded
messages
1
Call your unit.
2
Enter the remote operation ID during the
TAD/FAX greeting message.
3
When there are new recorded messages
1. A long beep will sound.
2. Short beep(s) will sound up to 8 times.
L
This indicates the number of new
messages.
3. New messages will be played back.
When there are no new messages
1. A long beep will sound (short beep will
not sound).
2. Wait for 4 seconds or press {5}.
3. All recorded messages will be played
back.
When voice memory is full
6 beeps will sound after playing back the
messages. Erase unnecessary messages.
8.4.2 Remote operations using
remote commands
{
1}: repeats a message. If you press this key
within 5 seconds of the beginning of a message,
the previous message will be played.
{
2}: skips a message.
{
4}: plays back new messages.
{
5}: plays back all messages.
8.4.3 Other remote operations
To erase a specific message
Press {*}{4} while listening to the message you
want to erase.
L
A long beep and 3 short beeps will sound.
The unit will then play back the next
message.
To erase all messages
Press {*}{5} to erase all messages.
L
A long beep and 3 short beeps will sound.
Answering device remote operation
1. Call your unit.
2. Enter the remote operation ID during the
TAD/FAX greeting message.
3. Enter a remote command within 10 seconds.
{
6}
Room monitor
{
7}
Re-records the greeting message
{
9}
Stops re-recording of the greeting
message
{*}{
4}
Erases a specific message
Key
Remote command
{*}{
5}
Erases all messages
{
0}
Skips the greeting message
{
8}{0}
Changes to TEL mode
{
1}
Repeats a message
{
8}{1}
Turns ON message transfer
{
2}
Skips a message
{
8}{2}
Turns OFF message transfer
{
4}
New message playback
{
8}{3}
Turns ON pager call
{
5}
All message playback
{
8}{4}
Turns OFF pager call
FT-901-903-907BX.book Page 43 Monday, March 29, 2004 10:03 AM