Self program time – Panasonic EP3513 User Manual

Page 24

Advertising
background image

22

self program

time

The display will flash.

lower back

lower body

back

neck/shoulder hands/arms

OK

self program time input

(1) Set the time for each area of the body.

• The time will change, as shown below,

according to the number of times pressed.

(2) Press after completing settings for each body area.

• The selected program will be configured to reflect your time settings.

2. Press .

3. Open the cover and input the time settings.

4. Close the cover.

• If the cover is left open, you will be unable to use the Leg Stretch OFF/ON, Back Vibration OFF/ON, Program

Strength or Focus buttons during the massage.

OK

From this point on the instructions for operation are the same as those for those once a massage
program is selected, as covered starting from step 2 of page 16.
Strength adjustment, on/off switching of leg stretch and back vibration functions are performed in
the same way. (See Page 19)

• The duration of a massage in the self program mode is approximately 15 minutes.
• Body scanning is not performed when all time settings for the upper body are set to zero. Upper-body vibration will

also be inactive in this case.

• If time settings for the lower body are set to zero, the massage will commence with leg stretch function set to off.

This function may be turned on by pressing the Leg Stretch OFF/ON button.

Advertising