Adjust massage position and strength – Panasonic EP3513 User Manual

Page 32

Advertising
background image

30

intensity

speed

position

lateral

vibration

3. Adjust massage position and strength.

(These adjustments cannot be made with the controller cover closed.)

4. When the massage is finished the unit will automatically shut off.

(The massage will finish approximately 15 minutes after it starts.)
• The massage heads will retract and then stop.

Adjusting Massage Position

Press .

Press .

Press .

• The approximate position of the massage will be shown on the Massage Area Display.
• If you hold the up or down button down the massage heads will continue to move until you release

the button.

• In some places the strength of the massage will be automatically reduced. (See Page 33)
• In some cases the massage position will not immediately change even though the Roller Position

button is pressed.

Adjusting Massage Strength

Press .

Press .

• The strength of the massage is shown on the Upper Body Massage Action Display in five stages.
• In some cases the degree to which the strength of the massage can be adjusted will depend on

the area being massaged. (See Page 31)

• In some cases the massage strength will not immediately change even though the Massage

Strength button is pressed.

• The strength of the back vibration function is not adjustable.

Adjusting Massage Speed

• The speed of the massage is shown on the Upper Body Massage Display in five stages.
• The speed of the back vibration function is not adjustable.

Adjusting Lateral Movement

• Press this button to increase the width of the massage in the location the massage

heads were in when you pressed the button.

• will be shown on the display.
• In some places the strength of the massage will be automatically reduced.

(See Page 33)

• Back vibration cannot be combined.
• Press the button again to revert to normal massage action.

Combining with the Back Vibration

The display will indicate whether the back
vibration function is turned on or off.
(Lit areas indicate active functions. Unlit
areas indicate inactive functions.)

(Press again to turn off.)

Back
Vibration

Advertising