Peavey SP 4G User Manual

Specs, Sound reinforcement enclosure with sound guard, Hf protection system

Advertising
background image

SPECS

P E A V E Y E L E C T R O N I C S

SP

4G

Sound Reinforcement
Enclosure with
Sound Guard

HF

Protection System

SPECIFICATIONS

Frequency Response, 1 Meter
On-Axis, Swept-Sine in Anechoic
Environment:

50 Hz to 17.5 kHz

Low Frequency Cut-Off (-3 dB point):

50 Hz

Usable Low Frequency Limit
(-10 dB point):

39 Hz

Power Handling:

Full Range:
600 W continuous (49.0 V RMS)
1,200 W program
2,400 W peak

Bi-amp Low:
700 W continuous (52.9 V RMS)
1,400 W program
2,800 W peak

Bi-amp High:
40 W continuous (17.9 V RMS)
80 W program
160 W peak

Sound Pressure Level, 1 Watt, 1
Meter in Anechoic Environment:

Full Range:

100 dB (2.0 V)

Bi-amp Low:

100 dB (2.0 V)

Bi-amp High:

106 dB (2.8 V)

Maximum Sound Pressure Level
(1 meter):

Full Range:
127 dB continuous
133 dB peak

Bi-amp Low:
128 dB continuous
134 dB peak

Bi-amp High:
122 dB continuous
128 dB peak

Radiation Angle Measured at -6 dB
Point of Polar Response:

500 Hz to 1.6 kHz:
Horizontal: 92

°

±

13

°

Vertical: 83

°

±

13

°

1.6 kHz to 5 kHz:
Horizontal: 83

°

±

19

°

Vertical: 57

°

±

17

°

5 kHz to 16 kHz:
Horizontal: 86

°

±

3

°

Vertical: 39

°

±

2

°

Directivity Factor, Q (Mean):

9.5

±

3.3

Directivity Index, Di (Mean):

9.5 dB

±

1.5 dB

Transducer Complement:

Two 1505-8 KADT Black Widow

®

woofers

One 22XT

compression driver loaded

by a CH

®

941 horn

Box Tuning Frequency:

50 Hz

Crossover Frequency (internal
passive):

1.8 kHz

Minimum Recommended Active
Crossover Frequency and Slope for
Bi-amping:

1.2 kHz at 18 dB/octave

Time Offset:

0.70 mS (delay Lows)

Impedance (Z):

Full Range Nominal: 4

Full Range Minimum: 3.9

Lows Nominal: 4

Highs Nominal: 8

Input Connections:

Two paralleled 1/4" phone jacks for

full-range input

One 1/4" phone jack for bi-amp low

frequency input

One 1/4" phone jack for bi-amp high

frequency input

Enclosure Materials and Finish:

3/4" plywood enclosure covered with black

carpet and protective polymer corners

Expanded metal grille to protect the low

frequency driver

Mounting Provisions:

None

Dimensions (H x W x D):

49.25" x 21.50" x 22.75"
(125.1 cm x 54.6 cm x 57.8 cm)

Advertising