Panasonic TH-32LHD7 - Manual (Page 19)

19
Adjusting PICTURE POSITION / SIZE
NORMAL NORMALIZE
PICTURE POS. /SIZE
V-POS
H-POS
V-SIZE
H-SIZE
CLOCK PHASE
1
Press to display the PICTURE POS. /SIZE menu.
Press to select H-POS / H-SIZE / V-POS / V-SIZE /
CLOCK PHASE.
Press to adjust POS. / SIZE.
Press to exit from adjust mode.
During “VIDEO (S VIDEO)”,
“COMPONENT” and “DVI” input signal.
During “RGB / PC” input signal.
3
2
Notes:
• Adjustment details are memorized separately for different input signal formats
(Adjustments for component signals are memorized for 525 (480) / 60i · 60p,
625 (575) / 50i · 50p, 1125 (1080) / 60i · 50i · 24p · 25p · 30p · 24sF, 1250 (1080)
/ 50i, 750 (720) / 60p · 50p each, and RGB/PC/DVI signals are memorized for
each frequency.)
• If a “Cue” or “Rew” signal from a VCR or DVD player is received, the picture
position will shift up or down. This picture position movement cannot be
controlled by the PICTURE POS. / SIZE function.
• If adjusting the PICTURE V-POS / V-SIZE in Panasonic AUTO with FULL mode,
the adjustment is not memorized. When exiting the mode, the screen will return
to a former adjustment.
While the PICTURE POS. / SIZE display is active, if either the N button on the remote control is pressed at any time or
the ACTION ( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.
Helpful Hint (
N
/ NORMALIZE Normalization)
Adjust the horizontal size.
Adjust the vertical size.
H-POS
V-POS
Adjust the horizontal position.
Adjust the vertical position.
H-SIZE
V-SIZE
CLOCK PHASE
(RGB/PC in mode) Eliminate the fl ickering and distortion.
4
NORMAL NORMALIZE
PICTURE POS. /SIZE
V-POS
H-POS
V-SIZE
H-SIZE
N R
INPUT
SURROUND
VOL
PICTURE SOUND SET UP
ASPECT
PICTURE
POS. /SIZE
OFF TIMER PC
MULTI
PIP SWAP SELECT MOVE
ZOOM
R
PICTURE
POS. /SIZE