Trouble shooting, Ecology – environment protection – Инструкция по эксплуатации ZELMER 13Z014

Страница 75

Advertising
background image

75

TROUBLE SHOOTING

PROBLEM

POSSIBLE CAUSE

HOW TO FIX, WHAT TO DO

Coffee runs out around the

edge of the filter holder

Filter holder

(E) is not inserted in the brew head properly or is not

tightened properly.

Ensure the holder

(E) is properly inserted in the brew head unit

and tightened home. See

Brewing espresso – p. 71.

There are coffee particles around the filter rim

(H).

Clean the rim of the filter

(H) and wipe all coffee from the brew

head.

Brew head is dirty.

Wipe the brew head with a damp cloth.

Brew head is damaged.

Contact an authorised service center.

Rubber seal of the head is damaged or worn out.

Contact an authorised service center.

Coffee does not run through

No water in the water tank.

Fill up the tank with water

(1).

Water tank is not properly installed.

Press the tank down to ensure it sits properly.

Knob

(K) is set into a different position, e.g. .

Ensure the regulator knob

(K) is in position

.

Filter on the brew head may be blocked.

See

Descaling – p. 74.

Coffee filter

(H) is blocked. Coffee is ground too finely or tamped

too firmly.

Empty the filter

(H) and rinse it under running water. Wipe the brew

head with a cloth.

Coffee filters out in drops

Coffee is ground very finely or tamped too firmly.

If you use very finely ground coffee, do not tamp it too firmly.

The appliance is blocked with scale build-up.

See

Descaling – p. 74.

Espresso does not have

characteristic foam

Coffee is stale or dry.

Use fresh coffee. After opening the coffee, ensure it is stored in

a tight container.

Coffee is not tamped firmly enough.

Tamp coffee more firmly.

Coffee is ground too coarsely.

Use properly ground coffee or change coffee brand.

Not enough coffee in the filter

(H).

See

Brewing espresso – p. 71.

Holder loosens during brewing

Coffee is tamped too firmly.

Tamp ground coffee less firmly.

Coffee is ground too finely.

Change to coarser coffee.

Filter holder

(E) does not sit firmly as it has not been tightened firm

enough.

Ensure coffee holder

(E) is placed correctly and tightened home in

the brew head.
See

Brewing espresso – p. 71.

There are coffee particles around the filter rim

(H).

Oczyść dookoła górną krawędź sitka

(H) i wytrzyj z kawy do czysta

głowicę.

Brew head is dirty.

Wytrzyj głowicę wilgotną ścierką.

Brew head is damaged.

Contact an authorised service center.

Rubber seal of the brew head is damaged or worn out.

Contact an authorised service center.

Coffee is too cold

Cups, filters

(H) or filter head are cold.

Before brewing, pre-heat cups, filters and holder. See

Brewing

espresso – str. 71.

When making cappuccino or latte, milk is not heated enough.

Check if milk is properly heated during frothing. Ensure that milk

does not boil. See

Frothing milk –p. 72.

No steam from steam wand

Steam wand

(C) is blocked.

See

Maintenance and cleaning – p. 74.

Not enough frothed milk

Milk is not fresh.

Check if milk is fresh.

Temperature of milk is too high.

Check that milk is properly cooled before use.

Jug.

To obtain best results when frothing, use the stainless steel jug

provided and cool it down or rinse with cold water if possible.

Steam wand is blocked.

See

Maintenance and cleaning – p. 74.

Milk has been boiled.

Try to use fresh, cooled milk.

Uneven distribution of coffee

into cups

Uneven distribution or interrupted outflow of coffee.

Check if coffee is evenly tamped and check if anything obstructs

the outlets in the head for fixing the filter.

Damaged partition in filter holder

(E).

Contact an authorised service center.

Espresso has burnt taste

Coffee used is unsuitable.

Try other coffee brands.

Appliance was not rinsed after descaling.

Before brewing next coffee, rinse the appliance with a tankfull of

water, allow tank to empty completely.

Pump makes too much noise

No water in water tank.

Fill up water tank with water

(1).

Water tank is not properly inserted.

Check if water tank is properly inserted.

Appliance does not work

Filter

(H) in brew head may be blocked.

Take out filter holder

(E) and clean brew head unit. See

Maintenance and cleaning – p. 74.

Appliance is blocked with scale build-up.

See

Descaling – p. 74.

ECOLOGY – ENVIRONMENT PROTECTION

Each user can protect the natural environment. It is neither difficult nor expensive.
In order to do it: put the cardboard packing into recycling paper container; put the polyethylene (PE) bags into container for plastic.
When worn out, dispose the appliance to particular disposal centre, because of the dangerous elements of this appliance, which can be

hazardous for natural environment.

Do not dispose into the domestic waste disposal!!!

Advertising