Connecting a tv and a blu-ray disc/dvd player, 3connecting a tv and a blu-ray disc/ dvd player, Step – Panasonic RQT9223 User Manual
Page 12: Connecting equipment with hdmi terminal, Connection cable, Blu-ray disc/dvd player hdmi video/audio out, Pages 16 to 20), Hdmi input digital audio out (optical)
12
RQT9223
Step
3
Connecting a TV and a Blu-ray Disc/
DVD player
• Connect AC power supply cord after all other cables and cords are connected.
• The included AC power supply cord is for use with this unit only. Do not use it with other equipment.
• Do not use an AC power supply cord from any other type of equipment with this unit.
• The unit’s settings remain effective after the AC power supply cord is removed from the household AC outlet.
Notes on AC power supply cord
Blu-ray Disc/DVD player
HDMI
Video/Audio out
Connecting equipment with HDMI terminal
Connection cable
Video and Audio cable
Audio cable
HDMI Cable (not included) (It is recommended that you use Panasonic’s HDMI cable.)
Recommended part number: RP-CDHG10 (1.0 m/3.3 ft.), RP-CDHG15 (1.5 m/4.9 ft.),
RP-CDHG20 (2.0 m/6.6 ft.), RP-CDHG30 (3.0 m/9.8 ft.),
RP-CDHG50 (5.0 m/16.4 ft.), etc.
Optical fiber cable (not included)
TV
•
This unit incorporates HDMI™ (V.1.3 with Deep Color) technology that can reproduce greater color gradation (4096 steps)
when connected to a compatible TV. A lower color gradation (256 steps), without deep color, will be reproduced if connected to a
TV which does not support deep color.
• Please use High Speed HDMI Cables that have the HDMI logo (as shown on the cover).
• When outputting 1080p signal, please use the HDMI cables 5.0 meters (16.4 feet) or less.
• The audio signal transmitted through HDMI takes priority when you use both HDMI and digital terminals for connection
(
➔
pages 16 to 20).
BI-WIRE
LF
HF
L
R
FRONT A
FRONT B
CENTER
SURROUND
SURROUND BACK
OUT
IN
IN
CD
BD/DVD PLAYER / ANALOG 8CH IN
DVD RECORDER
VCR
CABLE/SAT
GAME
AUDIO
SURROUND BACK SURROUND
FRONT
SUBWOOFER
OUT
IN
IN
IN
(DVD RECORDER)
(BD/DVD PLAYER)
(CABLE/SAT)
HDMI 1
HDMI 2
HDMI 3
FRONT A
FRONT B
CENTER
SURROUND
SURROUND BACK
S VIDEO
COMPONENT VIDEO
L
R
IN
IN
IN
IN
AC IN~
OUT
IN
IN
OUT
OUT
IN
IN
IN
IN
TV MONITOR
TV MONITOR
DVD RECORDER
VCR
CABLE/SAT
GAME
DVD PLAYER
BD/
(BD/
DVD PLAYER)
(DVD RECORDER)
(CABLE/SAT)
1
2
3
(DVD RECORDER) (BD/DVD PLAYER)
(CD)
OPTICAL 1
OPTICAL 2
COAXIAL
SUBWOOFER
Y
P
B
P
R
IN
OUT
OUT
IN
IN
IN
IN
TV MONITOR
DVD RECORDER
VCR
CABLE/SAT GAME
DVD PLAYER
BD/
OUT
CENTER
IN
IN
FM ANT
AM ANT
OPTION V.1
LOOP
EXT
75
Ω
R
L
R
R
L
L
LOOP ANT
GND
VIDEO
TV
DC OUT/SORTIE C.C.
5V 500mA MAX
Class2 wiring
SPEAKERS
HAUT-PARLEURS
A OR B/BI-WIRE : 4-8
Ω / EACH SPEAKER (CHAQUE)
A AND B : 6-8
Ω / EACH SPEAKER (CHAQUE)
6-8
Ω / EACH SPEAKER (CHAQUE)
(TV)
OPTICAL 3
DIGITAL IN
Household AC outlet
(AC 120 V, 60 Hz)
AC power supply cord (included)
Connecting the optical fiber cable
Note the
shape and fit it
correctly into
the terminal.
Do not bend!
Note
Rear panel
You can hear DVD sounds, etc. from TV speakers
when you turn off the unit connected as shown on
this page. This convenient function enables you to
enjoy DVD etc. without using the unit late at night.
Standby through function
HDMI input
Digital audio out (optical)
You need an optical fiber cable for
enjoying TV with a digital sound
output.
To enjoy TV with analog surround
sound make connection as
instructed on page 16.
SA-BX500-PP (RQT9223-Y)_En.indd 12
6/27/2008 4:05:17 PM