Panasonic RQT9223 - Manual (Page 14)

14
RQT9223
Step
4
Watching TV or DVD
ENTER
SUB MENU
S
TV/VIDEO
Testing speaker output
You can confirm audio output using the test signal.
1. Press to turn the unit on.
2. Press to select an input source other than
“TV ” or “BD/DVD P. ”.
3. Press to adjust the volume range between
–30dB and –35dB.
4. Press to test audio output from all
connected speakers.
• Speakers are displayed in the following order.
(The test signal is output only when the
connected speaker is displayed.)
L → C → R → RS → SBR → SBL → LS → SUBW
When you feel the volume of each speaker is not
balanced with the volume of the front speakers, see
page 31 to adjust the volume balance of speakers.
5. Press to stop the test signal.
6. Lower the volume to the normal listening level
using .
Turn the TV on and switch the TV’s input mode (to “HDMI” and others)
WIRELESS READY
SURROUND M.ROOM
INPUT SELECTOR
VOLUME
+ _
MULTI CH PROCESSING TrueHD D+ DTS-HD MULTI CH LPCM BI-AMP
SETUP MIC AUX
TUNE RETURN AUTO SPEAKER SETUP -SETUP OK SURROUND SPEAKERS A SPEAKERS B
S VIDEO VIDEO L - AUDIO - R
“ ”
SURROUND
“SURROUND”
SPEAKERS A
POWER
TEST
AUTO
TEST
AUTO
SA-BX500-PP (RQT9223-Y)_En.indd 14 6/27/2008 4:05:22 PM