Panasonic RQT9223 - Manual (Page 31)

31
RQT9223
Convenient functions
Remote contr
olling sound eff
ects / Con
venient functions
Operations
Adjusting speaker volumes
Adjust speaker output to balance front speaker sounds with those from each of the other
speakers in the seating area.
• Press [SPEAKERS A] on the unit to switch “ A ” on.
• Press [SPEAKERS A] or [SPEAKERS B] to switch “ A B ” on when bi-wire speakers
are connected.
(If you select “SPEAKERS B” only, the test signal will not be output.)
1. Press [INPUT SELECTOR] to select an input source which is
not connected.
• Or stop the playback of connected equipment.
2. Press [VOL +, –] to adjust the volume range
between –30dB and –35dB.
3. Press [–AUTO, TEST].
• Speakers are displayed in the following order.
SB LS SUBW RS C L R
SBR SBL LS SUBW RS C L R
(If you connect one surround back
speaker)
• Connected speakers output the test signal.
L : Front left, C : Center, R : Front right , RS : Surround right, SBR : Surround back
right,
SBL : Surround back left, SB : Surround back (If you connect one surround
back speaker), LS : Surround left, SUBW : Subwoofer
How speakers are displayed
4. Press [e] [r] to adjust the speaker volume when the test
signal is being output from the speaker to adjust.
• To shift the test signal output to next speaker, press [q].
Adjustment range: –20 dB to +10 dB
Factory setting: 0 dB
SUBW only:
MIN (minimum), 1 to 29, MAX (maximum)
Factory setting:
20
5. Press [–AUTO, TEST] to finish.
6. Lower the volume to the normal listening level using
[VOL +, –].
Note
• The front speakers cannot be adjusted with this operation. To adjust the front speaker
volumes, press [VOL +, –].
• To adjust the volume balance of left and right front speakers, see “Balancing front speaker
volume” (➔ page 35).
Silencing speakers temporarily
Press [MUTING].
• “ MUTING ” flashes while muting is activated.
• Press the button again to cancel the operation.
• Muting is cancelled when you turn the unit off or adjust the volume.
Displaying the current status
1. Press [INPUT SELECTOR].
2. Press [DISPLAY].
• The sound volume, SFC setting and Digital input (terminal name/format) scroll in turn across
the display.
• When the unit is receiving a dual audio signal, the reception status is displayed (➔ page 35).
• Preset channel number is also displayed when the preset channel is tuned (➔ page 48).
• When you press [DISPLAY] halfway in this process, the next item to the current display appears.
TV/VIDEO
ENTER
SUB MENU
S
or
SA-BX500-PP (RQT9223-Y)_En.indd 31 6/27/2008 4:06:02 PM