Digital signal processor, Introduction of dsp adjustments 73, Available accessories – Pioneer AVH-P5000DVD User Manual

Page 73: Introduction of dsp adjustments

Advertising
background image

2

Touch BSSM on the function menu to

turn BSSM on.
BSSM begins to flash. While BSSM is flashing
the 12 strongest broadcast stations will be
stored in order from the lowest channel up.
When finished,

BSSM stops flashing.

# To cancel the storage process, touch BSSM
again.

3

Touch ESC to return to the TV picture.

# To return to the previous display, touch BACK.

Note

Storing broadcast stations with BSSM may re-
place broadcast stations you have saved using
P01 to P12.

Digital Signal Processor

Introduction of DSP adjustments

You can use this unit to control multi-channel
processor (e.g. DEQ-P8000), which is sold sepa-
rately.
! Some functions may differ depending on the

multi-channel processor connected to this
unit.

Important

When a multi-channel processor and an optional
DVD player are connected to this unit, be sure to
use an optical cable (e.g., CD-AD600).

1 DSP display

Shows the DSP function names.

By carrying out the following settings/adjust-
ments in the order shown, you can create a fi-
nely-tuned sound field effortlessly.

1

Setting the speaker setting

2

Using the position selector

3

Auto TA and EQ (auto-time alignment and auto-
equalizing)

4

Adjusting the time alignment

5

Adjusting the speaker output levels using a
test tone

6

Selecting a cross-over frequency

7

Adjusting the speaker output levels

8

Adjusting 3-band parametric equalizer

1

Touch AV MENU and then touch

DSP MENU to display the DSP function
names.
The DSP function names are displayed and
operable ones are highlighted.

Available accessories

En

73

Section

04

A

vailable

accessories

Advertising