Pioneer DVR-640H-S - Manual (Page 127)

Additional information 15
127
En
If the unit does not operate normally due to external effects such as static electricity, disconnect
the power plug from the outlet and insert again to return to normal operating conditions.
On-screen displays and recorder displays
The table below shows a list of error messages that you may encounter when using the
recorder and an explanation of their meaning.
The picture freezes and
the front panel and
remote control but-
tons stop working • Press STOP then try restarting playback.
• Press the front panel STANDBY/ON button to switch the power
off, then switch back on and restart playback. If the power fails to
switch off, press and hold
STANDBY/ON for 5 seconds until the
power switches off.
A device connected via
USB does to function.
DVR-640H-S only
• Check that it is a device that may be connected to this unit (digital
camera, USB memory, memory card reader or printer).
• Use a USB cable less than 5 m in length.
• Check that the USB cable is inserted fully.
• Check that the USB device is powered on.
• Only the first digital camera, USB memory or memory card reader
connected is readable by this unit. Unplug multiple devices and
connect the device you want to use first.
Problem Remedy
Message Explanation/Action
• Initializing disc. Please wait a
moment. When you load a blank DVD-RW or DVD+RW disc,
the recorder automatically initializes it.
• Incompatible region number. The disc loaded has an incompatible region
number for the recorder and so will not play.
• Cannot record any more titles.
• No more space for file management
data. The disc control data limit has been reached, or
the maximum number of chapters and/or titles
has been reached. Erase titles/chapters or
combine chapters.
• This disc cannot be recorded. Undo
the finalization. The disc was finalized on a non-Pioneer DVD
recorder. Undo the finalization in order to
recording/editing.
DVR640H_WPW_EN.book 127 ページ ２００６年４月１１日 火曜日 午前９時４４分